Wiring and Device Connections
33
Instruction Manual - Enova DVX-325xHD/22xxHD All-in-One Presentation Switchers
MIC/LINE INPUTS
Two 3.5mm 3-pin captive-wire MIC/LINE INPUT connectors allow up to two mono microphones to be connected to the DVX. Each
microphone input supports balanced and unbalanced audio. Each input supports up to 48V of phantom power.
FIG. 30 displays the MIC/LINE INPUTS connectors.
FIG. 30
MIC/LINE INPUTS
FIG. 31 illustrates wiring connections between the DVX and a mono RCA output and an XLR output.
FIG. 31
RCA (mono) and XLR output wiring
AMP OUT
The AMP OUT amplified audio output differs according to the DVX model you are using:
The 4-position captive wire connector for -SP models provides amplified, variable, mono or stereo audio output.
The two 2-position captive wire connectors for -T models provide 70V or 100V mono amplified audio output. Connect a
speaker to either the 70V or 100V terminal, but not both simultaneously.
FIG. 32 displays the AMP OUT audio output.
FIG. 32
AMP OUT CLASS 2 WIRING Output
On -SP models, connect speakers to the AMP OUT output as displayed in FIG. 33.
FIG. 33
Connecting speakers to the Amplified Audio output (-SP models)
RCA output
XLR output
DVX
DVX
-SP models
-T models
