Harman AMX CTP-1301, User Manual

Page: 28 / 60

User Manual - CTP-1301 27
Relay
• RELAY Controller:
: Click to raise the projector screen.
: Click to lower the projector screen.
• RELAY MODE : Click the down arrow to select the Relay mode. Available modes are LATCH and MOMENTRAY. Default setting is
LATCH.
Audio
• Output Volume: Move the slider to set the output audio volume.
• Min/Max:
Move the sliders at the left and right sides of the scale to set the minimum and maximum range of the audio volume.
• Mute: Check (or uncheck) to mute (or unmute) the audio.
Resolution Setting
• AUTO: Click to set the output resolution to Auto mode (default setting). The output resolution may vary based on the connected
display’s native resolution.
• MANUAL: Click to set the output resolution to Manual mode. In Manual mode, click the down arrow to select a specific output
resolution as required.
• APPLY: Click to set the output resolution to the desired setting.