Harman® • Accentra 52i Owner’s Manual_R8 • 2013 -___ • 07/14
18
3-90-00574c
D. Glass Maintenance
The glass used in your stove is manufactured to exact standards to withstand the high heat of the fire, but like all glass, it
must be treated with common sense and care. Never abuse the glass by slamming the door shut or striking the glass with
a heavy object. If the glass is broken or damaged, do not operate the stove until it has been replaced.
Glass - Replacement
If the stove’s glass is cracked or broken, you must replace it before operating your stove. Remove pieces carefully. Replace
glass only with Harman® replacement glass;
do not use substitutes.
Carefully remove damaged glass, gasket material, and hold down clips (set aside).
Install the self adhesive 1/4"” gasket material around the front face of the glass. Set the glass panel and gasket gently onto
the door. Install the hold down clips and tighten with bolts.
Glass - Cleaning
Sometimes it will be necessary to clean accumulated ash from the glass surface; allowing this ash to remain on the glass
for long periods can result in “etching” due to the acidity of the ash. Never clean the glass while it is hot, and
do not
use
abrasive substances. Wash the surface with cool water, and rinse thoroughly. You may wish to use a non-abrasive cleaner
specifically designed for use on stove glass. In any case, dry thoroughly before relighting your stove.
Glass Gasket
Replace glass only with high temperature
ceramic glass.
Inspect door gasket during cleaning
and inspection
