31
Save These Instructions 3-90-775 Pellets or Corn/Pellet Mixture Only
P35i Fireplace Insert
WARNING! RIsK Of fIRE!
Keep combustible materi-
als, gasoline and other flammable vapors and liquids
clear of the appliance.
• Do
NOT
store flammable materials in the vicinity
of the appliance.
• Do
NOT
use gasoline, lantern fuel, kerosene,
charcoal lighter fluid or similar liquids to start or
"freshen up" a fire in this appliance.
Keep all such liquids well away from the heater while
it is in use, as combustible materials may ignite.
WARNING! RIsK Of fIRE!
Do
NOT
store fuel:
• Within the required clearance areas of the appli-
ance.
• Within the space required for fueling or ash re-
moval.
5. Cleaning Area Beneath Burn Pot Grate
• Frequency:
Monthly or more frequently depend-
ing on fuel quality and/or ash buildup.
• By:
User
a. Loosen the two wingscrews located on the front of
the burn pot housing.
b. Lift the cover off of the wingscrews and set aside.
c. Using your ash-vac, remove any ashes or debris from
the air chamber.
d. You can tap on the igniter, located above the cleanout
hole. This will help to remove any accumulation on
the igniter element.
e. Re-install the cleanout cover and tighten the
wingscrews. Be sure that the cover is completely
covering the hole, as air leakage here may lead to
incomplete combustion or poor ignition.
loosen the two wingscrews
on the front of the burn pot.
lift the cover off of the
wingscrews.
5. Cleaning Heat Exchanger & Exhaust
• Frequency:
Monthly or after each ton of fuel is
burned.
• By:
User
It is recommended that you use a vacuum that is
designed for ash, as ashes may block conventional
vacuum filters.
NOTICE: For optimal performance of your pellet burn-
ing appliance, you must perform regular cleaning and
maintenance as directed in this manual. Not doing so
will result in:
Poor performance
Smoke spillage into the room
Overheating of components
Failure to perform regular cleaning on your pellet
burning appliance will void the warranty.
a. Make sure the fire is out and cool. Disconnect
power cord prior to servicing.
b. Scrape the majority of ashes into the ash pan. Be-
gin with the back and roof above the burn pot.
c. Scrape the ashes from both sides, into the ash pan.
