22
"Sunrise" Gold Trim
This kit includes a gold trim piece for the ash lip
and a gold Sunrise piece for the door.
Referring to the diagram on page 5, note how the
various components of the door system fit together. Lay
the load door face down on a soft surface.
Clean the glass thoroughly using a nonabrasive glass
cleaner. Install the glass gasket around the outer edge of
the front face of the door glass carefully to insure proper
sealing.
Note: There are 4 tabs on the Sunrise. These tabs
have a step on the front side and are flush on the back
side. Place the "Sunrise" in the door so the step side is to
the front.
Set the glass pane gently onto the door. Install
the hold-down clips and tighten with bolts as shown on
page 5.
To install ash lip trim, simply slide the trim over the
ash lip and into the groove on the trim.
Gold Door
The gold door is assembled and installed the same
as the standard door. Refer to page 5. Be careful not to
scratch the glass. Remember to clean the gold before
starting a fire in the stove.
To install ash lip trim, simply slide the trim over the
ash lip and into the groove on the trim.
Cleaning Gold
The gold plated door and gold Sunrise should never
be buffed or polished. Abrasive cleansers and metal pol-
ishes will remove the plating and; therefore, should never
be used. If the gold needs to be cleaned, wait until the
stove is completely cool, then use a sponge, soap and
water to gently remove dirt and stains. Before relight-
ing the stove, remove all soap residue and wipe dry.
Tabs
Tabs
Door Options
Fig. 34
Fig. 35
Summary of Contents for 44 Magnum
Page 21: ...21 Wiring Diagram ...
