4. Using Navigation
17
US english
If you do not wish to enter a name of your choice,
press and hold the right control knob for more than
2 seconds to store the previously entered destination
in the destination memory.
The last destination entered can be filed at any posi-
tion by turning the right control knob . The memory
position is confirmed by briefly pressing the right
control knob .
A total of 50 destinations can be saved.
For final storage in the destination memory, either
start route guidance or switch the program to new des-
tination entry by selecting
NEW DESTINATION
.
Deleting stored destinations
Select destination memory (see page 23).
Select the destination to be deleted using the right
control knob and press
.
Destination memory full
Occurs, when the destination memory is full.
Select either
DELETE
by pressing the right control
knob to jump to the destination memory to delete
a destination or
BACK
by pressing the
button to
cancel saving.
4.7. Route guidance calculation
The message "Calculating route" indicates that the
distance is being calculated. This may take several
seconds.
After the first route guidance announcement, the
prompt
CD
will continue to flash on the display until
the route is completely calculated. When a distant
destination is entered, it is recommended that you
wait until
CD
has stopped flashing before departing.
Recalculating route.
If
the current route is not followed due to road blocks,
detours, unintentionally driving in the wrong direction
or failing to observe the recommendations, the system
immediately calculates a new route. During this re-cal-
culation, the display shows
NEW ROUTE
.
NEW DESTINATION
S T A R T - F A S T R .
ROUTE SETTINGS
A U N T M A R Y , W A S H I N G T O
COMPANY H, NEW YORK CITY, W
DEL
DEL
DEST. MEMORY FULL!
DELETE = OK
BACK = NAV
Nav
M A I N S T R E E T
+,
M A I N S T R E E T
