Harman Kardon SOUNDSTICKSII, Setup Manual

Page: 13 / 42

13
Step 5.
Plug power
cord into power
adapter.
Step 6.
Plug power
adapter into subwoofer.
Step 7.
Plug power cord
into wall receptacle.
Step 8.
Push power
ON/OFF button. Unit is
on when LED is lit.
Step 9.
Adjust volume
level by to or –
button. Touching both the
+ and – buttons mutes
the audio. When muted,
touching either button
unmutes the audio.
Symptom
No sound from subwoofer,
only satellites.
No sound from satellites,
only subwoofer.
High frequencies sound dull.
Possible problem
Subwoofer volume control set
at minimum.
Satellites not connected
to subwoofer.
Satellites not positioned properly.
Solution
Rotate subwoofer volume control clockwise until relative volume level
is appropriate.
Check connection of satellites to subwoofer.
Position and tilt (angle) loudspeakers toward listener. The sound from
the satellites is very directional due to the 4-element linear array design .
www.harmankardon.com
This product is intended to be supplied by a listed direct plug-in power unit marked “Class 2” and output rated 16V DC minimum 1.5 A.