Harman Kardon SIGNATURE 2.0, Service Manual

Page: 15 / 122

Rear Panel Connections
10
Signature 2.0
¡ 6-CH Direct Inputs: Use these inputs for
connections to optional, external audio adapters. To
select a device connected to these jacks, the audio input
for a source must be changed to “6-CH Direct” using the
Source Menu
(see figure OSD-6 on page 29).
™ Analog Audio Inputs: Connect the output of
analog audio devices to these inputs. Note the left
channel input is on top, and the right channel input is
on the bottom. Once the inputs have been connected
they may be assigned to any of the 2.0’s seven source
positions using the
Source Menu
(see figure
OSD-6 on page 29).
£ Record Outputs: Each of these two pairs of
jacks carries the identical audio signal, which is the
audio output selected through the
Record Outputs
menu (see figures OSD-35 and OSD-36 on pages 50 and
51). Connect these jacks to the “REC IN” input of a VCR,
cassette recorder, DAT, reel-to-reel recorder, or another
audio recording device.
¢ Main Channel Audio Outputs: Connect these
jacks to the input of the audio power amplifier. When
making connections to an amplifier make certain that
channels are connected to a matching input on the amp.
(e.g., front left to front left, center to center, etc.).
Rear Panel Connections
IMPORTANT NOTE: Never make or remove any connections to the Signature 2.0 with the Master Power Switch in the
“ON” position. It is also a good practice to make certain that the power amplifiers connected to the 2.0 are also turned
off when making or removing any connections. This eliminates the risk of possible damage to your speakers or other
system components.
When making connections to the Signature 2.0 make certain that the plugs are firmly seated into the jacks. This prevents
intermittent connections which may interfere with performance.
DIGITAL AUDIO DATA INPUTS
ANTENNA
SUB
1 2 3 4 5 6 SURR CENTER SURR CENTER FRONT
1 2 3 4 6 5
3 2
RS-232
115V
~
60Hz
75 WATTS
IR
IN
IR
OUT
TRIGGER
OUTPUT
FM AM
ANALOG AUDIO INPUTS AUDIO OUTPUTS REC OUTPUTS 6-CH DIRECT INPUTS EXTERNAL CONTROLS
L
R
L
R
FRONT
1
1
Confidential Unpublished Works © 1992-1997 Dolby Laboratories.
All Rights reserved.
DTS and DTS Surround are trademarks of Digital Theater Systems.
SERIAL NUMBER
MODEL NO.: SIGNATURE SERIES 2.0
HARMAN KARDON
NORTHRIDGE
CALIFORNIA, USA
MADE IN USA
AVIS:
RISQUE DE CHOC ELECTRIQUE - NE PAS OUVRIR
C A U T I O N C A U T I O N
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING:
TO REDUCE THE RISK OF FIRE
OR ELECTRIC SHOCK DO NOT EXPOSE THIS
EQUIPMENT TO RAIN OR MOISTURE.
OUT
MAIN
OUT IN
MAIN
4 5 6 2
S – VIDEO COMPOSITE VIDEO
REC REC
SUB
IN
®
NRTL / C
LR110480
CSA E65
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Double Insulated – When servicing
use only identical replacement parts.
¡ ™ £ ¢ ∞ ¶ • ª §
‚ ⁄ ‹ fi› ° ‡ fl · a
6-CH DIRECT INPUTS ANALOG AUDIO INPUTS REC OUTPUTS EXTERNAL CONTROLS AUDIO OUTPUTS
SUB
¡ 6-CH Direct Inputs
™ Analog Audio Inputs
£ Record Outputs
¢ Main Channel Audio Outputs
∞ Subwoofer Output
§ RS-232 Control Port
¶ IR Input
• IR Output
ª Trigger Output
‚ AC Power Cord
⁄ S-Video Record Output
¤ S-Video Main Output
‹ S-Video Inputs
› Composite Video Record Output
fi Composite Video Main Output
fl Composite Video Inputs
‡ Optical Digital Audio Inputs
° Coax Digital Audio Inputs
· AM Antenna Input
a FM Antenna Input
15
Signature 2.0 Processor/Tuner harman/kardon