PREAMP OUTPUT MAIN AMP INPUT
+
–
+
–
+
–
FRONT
LEFT
RIGHT
+
–
+
–
SURROUND
LEFT
RIGHT
CENTER
LEFT RIGHT
LEFT RIGHT
PREAMP OUTPUT
+
–
+
–
+
–
FRONT
LEFT
RIGHT
+
–
+
–
SURROUND
LEFT
RIGHT
CENTER
LEFT RIGHT
SB 10
9
ENGLISH
Connections
2. After you have made and verified all other connections, plug the subwoofer’s
Power cord into an active, unswitched AC outlet. DO NOT plug this cord into the
accessory outlets found on some audio components.
1b If your receiver/processor does not have a dedicated subwoofer output but does
have preamp-level (volume-controlled) line outputs, use the included LFE cable
to connect one of those outputs to either of the subwoofer’s Line-Level L/R In
Connectors. Use an RCA cable (not supplied) to connect the other receiver or
preamp line output to the other subwoofer Line-Level L/R In connector. Set the
subwoofer's Input Mode switch to the “Normal” position.
If you’re connecting to a receiver or preamp/processor with left and right line outputs
that are connected to front left and front right amplifier inputs, connect the single
ends of Y-adapters (not supplied) to the receiver or processor’s left and right line
outputs. Connect one of the Y-adapter’s double ends to the subwoofer’s Line Level L/R
In connectors, and connect the other double end to your amplifier’s front left and front
right inputs. Set the subwoofer's Input Mode switch to the “Normal” position.
Receiver or Processor
Receiver or Processor
Subwoofer
Subwoofer
To Preamp
Outputs
To Main Amp
Inputs
To Preamp
Outputs
Mono RCA Cable
(not included)
Mono RCA Cable
(not included)
To L/R
Inputs
To L/R
Inputs
LFE Cable
(included)
LFE Cable
(included)
Stereo "Y" Cable
(not included)
Stereo Audio Cable
(not included)
Set Input Mode
Switch to “Normal”
Set Input Mode
Switch to “Normal”
0252CSK - HK SB10 120V+230V OM EN.indd 9
05/10/10 14:07:44
