Onyx
Speaker Placement
4
NOTE: When the system gets into Operational mode either from the Sleep/
Standby mode or OFF mode, the last used settings will be restored –
volume, source, Wi-Fi settings.volume, source, Wi-Fi settings.
Volume Controls
These touch-sensitive buttons control the volume of the unit. These buttons are touch-
sensitive. A gentle finger touch can increase or decrease the volume.
• Press the (-) button to decrease the volume
• Press the (+) button to increase the volume
Bluetooth
This button helps you pair your system with other devices. The system enters into
Bluetooth pairing mode automatically when it is turned on for the first time. If you
want to switch to different wireless connection when you are already connected to a
source, press and hold the Bluetooth button for more than 4 seconds to put the speaker
into pairing mode again.
NOTE: The speaker’s Bluetooth device name is HK Onyx BT and password is
0000.
Wi-Fi
This button is used to connect your HK Onyx to your Wi-Fi network. The use of the button
depends on the set up method of your system.
Battery Level Indicator
This LED on HK Onyx indicates the status of the battery.
Onyx Rear Panel Connections and Controls
The connections and controls on the rear panel of the HK Onyx are:
1. USB Port ( For charging and Wi-Fi setup with iOS devices)
2. Power DC input
3. Aux input
4. WPS
USB Port (Charger)
The USB charger port can be used to charge most of the devices when the HK Onyx is
connected to the AC adapter in Operational, Sleep, or OFF modes.
Power DC Input
Connect the AC power adapter to this port to charge the inbuilt battery.
Aux Input
The speaker includes a 3.5 mm stereo mini analog auxiliary input. The system
automatically detects an audio signal from the auxiliary input.
WPS
The Wi-Fi Protected Setup (WPS) helps your device establish a secure wireless network
easily to any WPS enabled router.
Speaker Placement
The HK Onyx being wireless and portable can be placed at a place of your choice and
convenience.
You can place it anywhere in the room for the best sound experience.
Connections
This section helps you understand how to connect your device correctly to a power
source, and different input sources.
Power Connections
To charge the inbuilt battery, connect the AC adapter to a 110/220 volt power source.
Source Options
The speaker offers the following source connection options:
• Bluetooth
• Wi-Fi using AirPlay®
• Wi-Fi using DLNA
• Aux Input
Wi-Fi Connection
You can connect your Onyx to Wi-Fi compatible devices through the following options.
• WPS – If you have a WPS-enabled router
• iOS Wireless Wi-Fi sharing – If you have an iPhone or iPad with Bluetooth
• iOS Wi-Fi sharing – If you have an iPhone or iPad and a USB to 30pin or USB
to Lightning cable
• Ad-hoc mode – If you want to set up the speaker from a computer or other
device
Bluetooth Connection
You can connect your Onyx to Bluetooth compatible devices.
• Press the Bluetooth button for more than 4 seconds to enable Bluetooth
pairing mode.
