background image

14

SPEAKER CONNECTION GUIDE

SPEAKER CONNECTION GUIDE

Analog Receiver/Processor –
Line-Level Connections to
HKSUB 12

Use this installation method for 
analog receivers or processors 
that do not have digital processing 
or bass-management programming,
and where the receiver/processor is
equipped with an unfiltered subwoofer
output, or a volume-controlled preamp
(line-level) output:

Use the interconnect cable supplied with 
the HKSUB 12 to connect the line-level 
subwoofer output on your receiver or 
amplifier to 

either

the left 

or

right 

Line-

Level Full-Range Input

£

on the 

HKSUB 12 subwoofer. Use both the left 
and right inputs on the subwoofer if your
receiver or processor has both left and right
line-level outputs. (You will need to purchase
an additional 15-foot interconnect cable.)

If your receiver is equipped with line-level out-
puts but does not have a separate subwoofer
output, use a Y-adapter (not supplied) to
bridge the receiver’s preamp output to the
main amp input for that channel, and connect
the long end of the adapter to the corre-
sponding line-level input on the HKSUB 12.

IMPORTANT:

Do not use the 

SUB Input

¢

on the subwoofer with analog receivers

or processors that have a full-range sub-
woofer output, such as models that have
Dolby Pro Logic* surround processing,
but not Dolby Digital processing. However,
if your analog receiver or processor has 
a filtered subwoofer output, such as with
THX

®

-certified models, you may connect 

it to the 

SUB Input

¢

. Consult your 

receiver’s or processor’s owner’s manual 
for more information.

Make sure that you have configured 
your surround sound processor 
for “Subwoofer On.”

Connect each speaker to the corresponding
speaker terminals on your receiver or amplifier.

When all connections have been made, plug
the 

AC Power Cord

on the subwoofer

into an AC outlet.

12

Subwoofer

Out

Front

Left

Surround

Left

Front
Right

Surround

Right

HKSUB 12

Subwoofer

Center

Line-Level

L

R

–       +

–       +

–       +

–       +

–       +

–       +

–       +

–       +

–       +

–       +

–       +

–       +

–       +

–       +

Surround
Back Left

Surround

Back Right

Surround
Back Left

Surround

Back Right

Surround

Right

Front
Right

Surround

Left

Front

Left

Center

Receiver or Amplifier

Summary of Contents for HKB 4





















Reviews: