background image

MOUNTING OPTIONS  11

MOUNTING OPTIONS

HKB 4 and HKB 6 Bookshelf Speakers

The HKB 4 and HKB 6 speakers may be
placed on a shelf. Place the supplied rubber
pads on the bottom of each speaker, one
pad at each corner, to protect your furniture
and the speakers. These two models also
feature a threaded insert capable of accepting
OmniMount

®

wall-mount brackets.

Harman Kardon recommends that you
select Model 20.0 Wall to safely mount
your HKB 4 loudspeakers, and Model 
30.0 Wall to safely mount your HKB 6
loudspeakers. DO NOT mount these 
speakers from the ceiling, as they are 
not designed for ceiling mounting, and
doing so may present a serious danger 
to personal safety.

The customer is responsible for proper
selection and use of mounting hardware,
available through hardware stores, to prop-
erly and safely wall-mount the speakers.

HKTW 6 Floorstanding Speakers

The HKTW 6 speakers are placed directly
on the floor. Each speaker is equipped with
a rubber foot at each corner to protect
hard-surfaced floors, such as wood or
ceramic tile. If you are placing the speakers
on a carpeted floor, screw the supplied
spiked feet into the threaded inserts in the
center of each rubber foot to decouple 
the speaker from the floor for improved
performance.

HKC Center Channel Speaker

The HKC speaker may be placed on a shelf
above or below the video display, or on top
of the television if there is a sufficient room.
Place the supplied rubber pads on the 
bottom of the speaker, one pad at each
corner, to protect your furniture and the
speaker.

HKSUB 12 Powered Subwoofer

The HKSUB 12 speaker should be placed
directly on the floor. Due to its weight, the
HKSUB 12 should not be placed on a
shelf, and it should not be mounted on a
wall. Make sure to leave adequate space
around the amplifier heatsinks for proper
ventilation. Place the HKSUB 12 near an
active electrical outlet to avoid using an
extension cord. See the Safety Informatioin
on pages 3 and 4 for more information on
proper placement and installation of the
HKSUB 12.

Summary of Contents for HKB 4





















Reviews: