background image

HK 3700 Stereo Receiver

General Specifications

Power requirement: 120V AC / 60Hz
Power consumption: <0.5W (standby); 170W maximum
Dimensions: (H x W x D): 4-3/4" x 17-5/16" x 11-13/16" 
(121mm x 440mm x 300mm)
Weight: 6kg

Built-in 24bits/192kHz DAC
Phono input
HARMAN GreenEdge™ technology
New, compact design
vTuner (Internet radio) streaming
Multi-device, programmable/learning remote control
Harman Kardon® Remote app for compatible iOS® and 
Android™ smartphones and tablet
Front-panel USB port for connection to compatible Apple® 
products or USB flash drive

Power

Stereo power: 85 watts per channel, two channels driven @ 
6/8 ohms, 20Hz – 20kHz, <0.07% THD
Input sensitivity/impedance: 250mV/27k ohms
Signal-to-noise ratio (IHF-A): 100dB
Frequency response (@ 1W): 10Hz – 130kHz (+0dB/–3dB)
High instantaneous-current capability (HCC): ±XX amps

FM Tuner

Frequency range: 87.5MHz – 108.0MHz
Usable sensitivity IHF: 1.3μV/13.2dBf
Signal-to-noise ratio (mono/stereo): 70dB/68dB
Distortion (mono/stereo): 0.2%/0.3%
Stereo separation: 40dB @ 1kHz
Selectivity (±400kHz): 70dB

AM Tuner Section

Frequency range: 520kHz – 1,710kHz
Signal-to-noise ratio: 38dB
Usable sensitivity (loop): 500μV
Distortion (1kHz, 50% mod): 1.0%
Selectivity (±10kHz): 30dB

HK 3770 Stereo Receiver

General Specifications

Power requirement: 120V AC / 60Hz
Power consumption: <0.5W (standby); 240W maximum
Dimensions (H x W x D): 4-3/4" x 17-5/16" x 11-13/16" 
(121mm x 440mm x 300mm)
Weight: 6kg

Bluetooth® 
Optical and coaxial inputs
Built-in 24bits/192kHz DAC
Phono input
HARMAN GreenEdge™ technology
New, compact design
vTuner (Internet radio) streaming
Multi-device, programmable/learning remote control
Harman Kardon® remote app for compatible iOS® and 
Android™ smartphones and tablet
Front-panel USB port for connection to compatible Apple® 
products or USB flash drive

Power

Stereo power: 120 watts per channel, two channels driven 
@ 6/8 ohms, 20Hz – 20kHz, <0.07% THD
Input sensitivity/impedance: 250mV/27k ohms
Signal-to-noise ratio (IHF-A): 100dB
Frequency response (@ 1W): 10Hz – 130kHz (+0dB/–3dB)
High instantaneous-current capability (HCC): ±XX amps

FM Tuner

Frequency range: 87.5MHz – 108.0MHz
Usable sensitivity IHF: 1.3μV/13.2dBf
Signal-to-noise ratio (mono/stereo): 70dB/68dB
Distortion (mono/stereo): 0.2%/0.3%
Stereo separation: 40dB @ 1kHz
Selectivity (±400kHz): 70dB

AM Tuner Section

Frequency range: 520kHz – 1,710kHz
Signal-to-noise ratio: 38dB
Usable sensitivity (loop): 500μV
Distortion (1kHz, 50% mod): 1.0%
Selectivity (±10kHz): 30dB

Summary of Contents for HK 3700








Reviews: