background image

6

INTRODUCTION

audio Inputs

AM/FM tuner

 

Analog Audio 1 through 5

 

Front-panel Analog Audio

 

6-/8-Channel Analog Audio

 

audio/Video Inputs

Three Analog Video

 

Front-panel Analog Video

 

Two Component Video 100MHz

 

Four HDMI™ (V.1.3a with Deep Color)

 

Faroudja DCDi Cinema™ video processing

 

Transcodes composite video to component video

 

Transcodes 576i/480i video to component video format, with 

 

upscaling to 1080i

Transcodes 576i/480i video to HDMI output, with upscaling to 1080p

 

 

 dock for iPod* and iPhone connectivity with audio/video 

playback

Digital audio Inputs

Coaxial: two rear-panel/one front-panel

 

Optical: three rear-panel/one front-panel

 

outputs

7.1-Channel preamp outputs

 

Analog Audio 2 and 4

 

Analog Video 2

 

Video Monitor (composite and component)

 

Digital Audio (one coaxial)

 

HDMI (V.1.3a with Deep Color)

 

Multizone Audio: speaker- and two line-level (one dedicated, one shared 

 

with surround back channels)

A-BUS® port

 

Headphone

 

ease of use

EzSet/EQ™ automated setup (microphone supplied)

 

Full-color user interface and setup menu, generated in high-definition 

 

video

Two-line dot-matrix front-panel display

 

Color-coded connections

 

Programmable, learning eight-device main remote control (includes AVR 

 

control over The Bridge III)

Source input renaming

 

Lip Sync Delay (up to 180msec)

 

USB port for system upgrades

 

Switched accessory power outlet

 

Remote infrared (IR) input and output

 

Zone 2 IR input, Carrier IR output and A-BUS IR Output

 

IEC detachable AC power cord for easy installation (

 

AVR 460 only)

Supplied accessories

The following accessory items are supplied with the AVR 460/AVR 360. If any 
of these items are missing, please contact Harman Kardon customer service at 
www.harmankardon.com.

System and Zone 2 remote controls (Zone 2 Remote Control 

 

AVR 460 only)

EzSet/EQ™ microphone

 

AM loop antenna

 

FM wire antenna

 

Four AAA batteries for 

 

AVR 360 and Six AAA batteries for AVR 460

Two covers for front-panel jacks

 

AC power cord (

 

AVR 460 only)

*  Charges iPod nano 4th generation, iPod touch 2nd generation, iPhone 3G, iPod nano 3rd 

generation, iPod classic, iPhone, iPod touch 1st generation, iPod nano 2nd generation, 
iPod 5th generation, iPod nano 1st generation, iPod 4th generation, iPod mini.

Summary of Contents for HARMAN/KARDON AVR 460







































Reviews: