S
AFETY
C
AMERA
:
You can set the GPS-200/300 to warn you against Safety/
Speed cameras along the way. Pressing “Enable” in the Enable Safety Cameras
screen opens an information/Warning window showing the internet address
“www.speedcamupdate.com”, where you may download the necessary infor-
mation against a subscription charge. Also, you are warned that the function
may be prohibited in certain countries. You have to connect the GPS Unit to
your PC with the supplies USB-cable to download the information, following
the instructions on the homepage. You may select permanent or temporary
cameras, or both.
Pressing “Yes” in the information/warning window Opens the Enable screen
with the Enable button highlighted in blue. Pressing the blue button again
will disable the camera function.
Once inside the camera screen, you may choose between options regarding
Audible Warnings and Visible Warnings. Press Audible Warning to select hear-
ing the warnings either: 1) If you drive too fast, 2) Always or 3) Not at all. Press
Visible Warning to select seeing the warnings either: 1) As a Simple image, 2)
As a Detailed image including speed limit and distance to the camera, or 3)
No visible warnings.
!
Using the Safety Camera warning function may be prohibited by law in
certain countries. The user should determine whether the use of this
feature is governed by any law prior to its use.
U
ser Manual
e
d
i
u
g
+
y
a
l
p
™
GPS-200/300
19
ENGLISH
35606_GPS200_300_eng:35606_GPS200_300 04/02/08 10:07 Side 19
