13
PROGRAMMED-PLAY OPERATION
Programmed-Play Operation
The FL 8370’s advanced programming capability
enables you to preset the order in which tracks
play, repeat specific discs or tracks, repeat all
discs and tracks, and/or repeat any portion of a
specific disc.
Programmed Play
Programmed play allows you to program up to
32 tracks into the FL 8370’s memory. To begin
programming the FL 8370, press the
Program
button
) j
. The
P
PR
RO
OG
GR
RA
AM
M
indicator will
light in the
Information Display
Ó
.
You may now begin to enter the discs and
tracks in the order in which you wish to have
them play. Once the
P
PR
RO
OG
GR
RA
AM
M
indicator is lit,
P-01
will appear in the Information Display,
replacing the track time. This indicates that you
are about to program the first track.
Press the
Disc-Select
button
( a
to choose
the first disc to be programmed, and note that
AL
will flash in the Information Display. To
have all tracks on the disc play in order as the
first program step, press the
Program
button
) j
. To select a single track on the disc,
press the
Numeric
buttons
b
corresponding
to the desired track. You may also use the
Skip
buttons
^ e
to select a track.
When the disc and track are selected, press
the
Program
button
) j
. Note that the
program-step indication on the right side of the
Information Display will change to
P-02
. You
may now select another disc and/or track for
the next program step, following the instruction
shown above. When the program step is
selected, press the
Program
button
) j
.
Repeat this procedure for each program step
until you have completed the desired program-
ming. Press the
Stop
button
% f
to com-
plete a program sequence, or press
Play
$
g
to begin immediate play of a program
sequence. If the maximum of 32 program steps
is reached, the program-step indication at the
right side of the Information Display will go
out, and the disc and track that have been pro-
grammed as the first program step will be
shown.
Once a program list has been entered, press the
Play
button
$ g
to begin listening to the
sequence. After the entire program has been
played, the FL 8370 will stop. As long as the
Stop
button
% f
has not been pressed and
the
P
PR
RO
OG
GR
RA
AM
M
indicator remains lit, you may
repeat the programmed-play sequence again by
pressing the
Play
button
$ g
.
Pressing the
Stop
button
% f
twice,
opening the disc drawer by pressing the
Open/
Close
button
!
, or turning the FL 8370 off
will erase the program information from the
unit’s memory.
Checking Program Contents
To check the contents of a program while the
unit is stopped, press the
Skip
buttons
^ e
and the Information Display will step through
each of the programmed discs and tracks.
Clearing Programs
To clear a single track from the program list, press
the
Program
button
) j
until the track to be
deleted from the program sequence appears in the
Information Display
Ó
. When the track num-
ber appears, press the
Clear
button
9 c
once.
Press the
Program
button
) j
to select other
items to be deleted, or the
Stop
button
% f
to
end the deletion process.
When the unit is stopped, but the
P
PR
RO
OG
GR
RA
AM
M
indi-
cator is still lit, you may clear the entire contents of
a program by pressing the
Clear
button
9 c
.
Repeat Play
The FL 8370’s programming system enables you
to repeat all of the tracks on all of the discs, a
complete single disc, or a single track.
Repeat Track Play
To repeat a single track, press the
Repeat
but-
ton
7 m
while the desired track is playing so
that the
R
REEP
PEEA
AT
T
and
1
1
indicators are lit. The
desired track may also be selected using the
Disc-Select
buttons
( a
and then the
Skip
buttons
^ e
. When the track is chosen,
press the
Repeat
button
7 m
and the
Play
button
$ g
. The track will play until the
Stop
button
% f
is pressed.
Repeat Disc Play
To repeat an entire disc, press the
Repeat
but-
ton
7 m
twice so that the
R
REEP
PEEA
AT
T
,
1
1
and
D
D II S
S C
C
indicators are lit. Press the
Disc-Select
buttons
( a
until the desired disc’s icon is
lights and the disc number appears in the
Information Display. Press the
Play
button
$
g
to begin the playback sequence. The
selected disc will play through to the end and
then continue to repeat until the
Stop
button
% f
is pressed.
Repeat All Discs
To repeat all of the discs that have been loaded
into the FL 8370, press the
Repeat
button
7
m
three times so that the
R
REEP
PEEA
AT
T
,
A
ALLLL
and
D
DIIS
SC
C
indicators are lit. Press the
Play
button
$ g
, and the unit will play all tracks on all
discs, starting with the disc that has been
loaded in the play position. When all discs have
played through, the sequence will repeat and
the discs will continue to play until the
Stop
button
% f
is pressed.
NOTE: You may cancel a repeat function any
time by pressing the
Repeat
button
7 m
until the
R
REEP
PEEA
AT
T
indicators go out. The player
will continue with normal play and then stop
when the current disc is finished playing.
