INSTALLATION
Parts List
Drive + Play includes the following components and parts:
•
Text Display With Universal Mounting Base and Attached
Cable (3m)
•
Control Knob With 30° Mounting Base and Attached
Cable (3m)
•
Electronics Enclosure (the Brain)
•
Wired FM Adapter
•
Removable 12-Volt Accessory Power Cable (2m) with
Cigarette Lighter Adapter and In-Line Fuse Holder
•
Line Out Cable (1.6m): Stereo 3.5mm (M) Plug to L/R RCA
(M) Plugs
•
iPod Cable (3m): 8-Pin Mini DIN (M) Plug to iPod Dock
Connector
•
0° Control Knob Base
•
(2) Mounting Plates for Knob Base and Display Base
•
(10) Mounting Screws: (3) Knob Base, (3) Display Base and
(4) Electronics Enclosure
•
(6) Cable Ties, Black
•
(2) Hex Keys: 3mm and 1.5mm
•
(2) Adhesive Mounting Pads
•
(2) Alcohol Prep Pads
Tools and Precautions
To install Drive + Play components, we recommend using the
following tools:
•
Electric or cordless drill with drill bit set
• Phillips
screwdriver
set
• Pencil
• Protective
eyewear
Before starting the installation, please observe the following
precautions:
• Turn off all audio system power, including the iPod, before
making any connections.
• Always wear protective eyewear when using tools.
Choosing Installation Locations
IMPORTANT: Drive + Play should be installed according to
these instructions and relevant regulations. No part of this
system should obstruct the driver’s view of the road or vehicle
controls or information displays necessary for safely operating
the vehicle. The text display should be positioned to eliminate
glare and reflections, and should be as close as possible to the
driver’s normal line of sight.
Drive + Play Components
Drive + Play consists of three main components: Text Display,
Control Knob and Electronics Enclosure. They operate together
as a system to make controlling your iPod easy, and to route the
audio signal to your mobile audio system. All three components
must be installed. You can choose wireless FM transmission,
wired FM transmission, or direct connection of the line-output
audio signal for the audio interface.
Text Display Location
The Text Display shows current iPod information and is similar
to the display on your iPod. It comes with a three-position
pivot arm for almost limitless viewing adjustment. You can
install the unit in a variety of locations, as long as the
proposed site offers a direct view of the display. For easiest
viewing, mount the unit near other instrument-panel gauges
or on top of the dashboard.
Control Knob Location
The Control Knob allows you to control the iPod much like the
iPod Click Wheel. The unit comes with interchangeable bases so
you can choose the most comfortable operation angle. Ideally,
you should install the Control Knob in a location that provides
comfortable access while driving where you can easily locate and
operate it without taking your eyes off the road.
continued on next page...
INSTALLATION 3
INSTALLATION
Install Text Display
Install Control Knob
Install
Electronics
Enclosure
(on windshield
glass)
(on gauges
panel)
(on dash)
(on dash)
(on console)
(under
seat)
(behind
radio)
(in glove
box)
Summary of Contents for DRIVE + PLAY
Page 1: ...Owner s Manual ...
