Harman Kardon DPR 1001, Service Manual

Page: 17 / 165

Video 1 Video Outputs: Connect these jacks
to the RECORD/INPUT composite or S-Video jack
on a VCR.
‹
Video 1 Audio Outputs: Connect these jacks to
the RECORD/INPUT audio jacks on a VCR.
›
Video 2 Video Inputs: Connect these jacks to
the PLAY/OUT composite or S-Video jacks on a TV
or other video source.
fi
Video 2 Audio Inputs: Connect these jacks to
the PLAY/OUT audio jacks on a TV or other video
source.
fl
Video 2 Video Outputs: Connect these jacks
to the RECORD/INPUT composite or S-Video jacks
on a TV or other video source.
‡
Video 2 Audio Outputs: Connect these jacks to
the RECORD/INPUT audio jacks on a TV or other
video source.
°
Video 3 Video Inputs: Connect these jacks to the
PLAY/OUT composite or S-Video jacks on a cable
box or other video source.
·
Video 3 Audio Inputs: Connect these jacks to
the PLAY/OUT audio jacks on a cable box or other
video source.
a
DVD Audio Inputs: Connect these jacks to the
analog audio jacks on a DVD or other video source.
b
Digital Audio Outputs: Connect these jacks to
the matching digital input connector on a digital
recorder such as a CD-R or MiniDisc recorder.
c
Surround Back/Multiroom Speaker Outputs:
These speaker terminals may be used with 7.1-chan-
nel systems or to power the output of the multiroom
system when the multiroom system and the main
room are using the same input. Connect these outputs
to the ma and – terminals on your surround
back channel speakers. In conformance with the CEA
color-code specification, the brown terminal is the
positive (+) terminal that should be connected to the
red (+) terminal on the Surround Back Left speaker
with older color-coding, while the tan terminal should
be connected to the red (+) terminal on the Surround
Back Right speaker with older color-coding. Connect
the black (–) terminal on the receiver to the matching
black negative (–) terminals for each surround back
speaker. (See page 14 for more information on
speaker polarity and pages 19–20 for information on
configuring the DPR 1001 for 7.1 speaker channels.
See page 31 for information on powering the multi-
room system with the DPR 1001’s internal amplifier.)
d
Surround Speaker Outputs: Connect these
outputs to the ma and – terminals on your
surround channel speakers. In conformance with the
new CEA color-code specification, the blue terminal is
the positive (+) terminal that should be connected to
the red (+) terminal on the Surround Left speaker with
older color-coding, while the gray terminal should be
connected to the red (+) terminal on the Surround
Right speaker with the older color-coding. Connect
the black (–) terminal on the receiver to the matching
black negative (–) terminals for each surround
speaker. (See page 14 for more information on
speaker polarity.)
e
Center Speaker Outputs: Connect these terminals
to the ma and – terminals on your center
channel speaker. In conformance with the new CEA
color-code specification, the green terminal is the pos-
itive (+) terminal that should be connected to the red
(+) terminal on speakers with the older color-coding.
Connect the black (–) terminal on the receiver to the
black negative (–) terminal on your speaker. (See
page 14 for more information on speaker polarity.)
f
Front Speaker Outputs: Connect these outputs
to the ma or – terminals on your left and right
speakers. The white terminal is the positive (+) termi-
nal that should be connected to the red (+) terminal
on the Front Left speaker with older color-coding,
while the red terminal should be connected to the red
(+) terminal on the Front Right speaker with the older
color-coding. Connect the black (–) terminal on the
receiver to the matching black negative (–) terminals
for each front speaker. (See page 14 for more infor-
mation on speaker polarity.)
g
AC Accessory Outlets: These outlets provide
power for low-current devices such as a VCR, cable
box, CD or DVD player. However, they should
not be
used with high-current devices such as amplifiers. The
total power consumption of all devices connected to
the accessory outlets should not exceed 100 watts.
The bottom outlet is switched, which means that power
is supplied only when the DPR is turned on. Since the
power is removed when the DPR is turned off, this
outlet should not be used for devices such as VCRs
where a constant power source is required for a
clock or timer.
The top outlet is unswitched, which means that power
is available only when the DPR is plugged in.
h
AC Power Cord: Connect the AC plug to an
unswitched AC wall output.
i
Preamp Outputs: These jacks may be connected
to an external power amplifier.
j
LFE/Subwoofer Output: Connect this jack to the
line-level input of a powered subwoofer. This output is
filtered, and should be connected to your subwoofer’s
LFE or other input that bypasses the subwoofer’s
internal crossover. Consult the owner’s manual for
your subwoofer for further information. If an external
subwoofer amplifier is used, connect this jack to
the subwoofer amplifier input.
k
Coaxial Digital Audio Inputs: Connect the coax
digital audio output from a DVD player, HDTV receiver,
cable box or satellite receiver, the S/P-DIF output of a
compatible computer sound card playing MP3 files or
streams, an LD player or a CD player to these jacks.
The signal may be a Dolby Digital, DTS or compatible
MP3 signal, or standard PCM digital source. Do not
connect the RF digital output of an LD player directly
to these jacks.
Optical Digital Audio Inputs: Connect the
optical digital audio output from a DVD player, HDTV
receiver, cable box or satellite receiver, the S/P-DIF
output of a compatible computer sound card playing
MP3 files or streams, an LD player or a CD player to
these jacks. The signal may be a Dolby Digital signal,
DTS signal, compatible MP3 signal or standard PCM
digital source.
DVD Video Inputs: Connect these jacks to the
composite or S-Video output jacks on a DVD or other
video source.
6-Channel Direct Inputs: When an optional
playback device such as a DVD-Audio or SACD player
with 5.1 audio capability is in use, connect the player’s
output jacks here.
8-Channel Direct Inputs: When an optional
playback device such as a DVD-Audio or SACD player
with 6.1 or 7.1 audio capability is in use, first connect
the Front, Center and Surround Channel outputs to the
6-Channel Direct Input Jacks , then connect
the Surround Back channel outputs of the player to
these input jacks.
Video Monitor Outputs: Connect this jack to the
composite or S-Video input of a TV monitor or video
projector to view the on-screen menus and the output
of a composite or S-Video source selected by the
DPR 1001.
Video Monitor Component Video Outputs:
Connect these outputs to the component video
inputs of a video projector or monitor. When a source
connected to one of the two
Component Video
Inputs is selected the signal will be sent to
these jacks.
DVD Component Video Inputs: Connect the
Y/Pr/Pb component video outputs of a DVD player to
these jacks.
Video 2 Component Video Inputs: Connect the
Y/Pr/Pb component video outputs of an HDTV set-top
convertor, satellite receiver or other video source
device with component video outputs to these jacks.
38
37
38 37
36
35
33
34
33
32
31
12
DPR1001 harman/kardon
REAR PANEL CONNECTIONS (CONT'D)