Harman Kardon CDR 30 Service Manual Download

Page: 10 / 90

™

∞

•

‚

⁄

Play (CDP)-Deck Analog Output

™

Record (CDR)-Deck Analog Output

Record (CDR)-Deck Analog Input

Play (CDP)-Deck Coaxial-Digital Output

∞

Record (CDR)-Deck Coaxial-Digital Output

Record (CDR)-Deck Coaxial-Digital Input

Record (CDR)-Deck Optical-Digital Input

•

Record (CDR)-Deck Optical-Digital Output

Play (CDP)-Deck Optical-Digital Output

‚

Remote IR Input

⁄

Remote IR Output

AC Power Cord

Play (CDP)-Deck Analog Output:

These

jacks carry the analog audio output signal from
the

Play Deck

. Connect them to the CD

input jacks on a receiver, preamp or processor.

™

Record (CDR)-Deck Analog Output:

These jacks carry the output signal from the

Record Deck

. Connect them to the Tape

Play/In input jacks on a receiver, preamp or
processor.

Record (CDR)-Deck Analog Input:

These

jacks accept the analog signals that are used
for CD recordings. Connect them to the Tape
Rec/Play outputs on a receiver, preamp or
processor.

Play (CDP)-Deck Coaxial-Digital

Output:

This jack carries the digital-audio out-

put signal from the

Play Deck

. Connect it

to a coaxial-digital input on a receiver, proces-
sor or digital decoder.

∞

Record (CDR)-Deck Coaxial-Digital

Output:

This jack carries the digital audio out-

put signal from the

Record Deck

. Connect

it to a coaxial digital input on a receiver,
processor or digital decoder.

Record (CDR)-Deck Coaxial-Digital

Input:

This jack accepts the digital-audio input

signal from a compatible digital audio product
and should be connected directly to a digital
player or to a coaxial-digital output on a CD or
DVD player or an A/V receiver or processor.

IMPORTANT NOTE:

The coaxial digital inputs

should only be connected to

digital

input or

output jacks. Even though they use the same
RCA-type connector as standard analog audio
connections, DO NOT connect them to conven-
tional analog input or output jacks.

Record (CDR)-Deck Optical-Digital

Input:

This jack accepts the digital-audio input

signal from a compatible digital audio product,
and should be connected directly to the optical-
digital output on a CD or DVD player or an A/V
receiver or processor.

•

Record (CDR)-Deck Optical-Digital

Output:

This jack carries the digital audio out-

put signal from the

Record Deck

. Connect

it to an optical digital input on a receiver,
processor or digital decoder.

Play (CDP)-Deck Optical-Digital

Output:

This jack carries the digital audio out-

put signal from the

Play Deck

. Connect it

to an optical-digital input on a receiver, proces-
sor or digital decoder.

‚

Remote IR Input:

Connect the output of a

remote infrared sensor or the remote control
output of another compatible Harman Kardon
product to this jack. This will enable the remote
control to operate even when the front panel

Remote Sensor

is blocked. This jack may

also be used with compatible IR remote control
based automation systems.

⁄

Remote IR Output:

Connect this jack

to the IR input jack of another compatible
Harman Kardon remote controlled product to
have the built-in

Remote Sensor

on the

CDR 30 provide IR signals to other compatible
products.

AC Power Cord:

Connect this plug to an