Harman Kardon AVR 510, Service Manual

Page: 10 / 132

10 REAR PANEL CONNECTIONS
Rear Panel Connections
¡
Tape Inputs: Connect these jacks to the
PLAY/OUT jacks of an audio recorder.
™
Tape Outputs: Connect these jacks to the
RECORD/INPUT jacks of an audio recorder.
£
Video 1 Audio Inputs: Connect these
jacks to the PLAY/OUT audio jacks on a VCR
or other video source.
¢
AM Antenna: Connect the AM loop antenna
supplied with the receiver to these terminals. If an
external AM antenna is used, make connections
to the
AM and GND terminals in accordance
with the instructions supplied with the antenna.
∞
Video 1 Audio Outputs: Connect these
jacks to the RECORD/INPUT audio jacks on
a VCR.
§
DVD Audio Inputs: Connect these jacks
to the analog audio jacks on a DVD or other
video source.
¶
FM Antenna: Connect the supplied indoor or
an optional external FM antenna to this terminal.
•
CD Inputs: Connect these jacks to the out-
put of a compact disc player or CD changer.
ª
6-Channel Direct Inputs: If an external
digital audio decoder is used, connect the out-
puts of that decoder to these jacks.
‚
Multiroom Outputs: Connect these jacks
to an optional audio power amplifier to listen
to the source selected by the mulitroom system
in a remote room.
⁄
Amplifier Inputs: When the jumper pins
that link the Preamp Outputs
¤
with these
inputs are removed, these jacks may be used to
connect an external source or the AVR 510’s
multiroom system to the internal amplifiers.
(See page 17 for more information on using
these connections.)
¤
Preamp Outputs: When the jumper pins
that link the Amplifier Inputs
⁄
with these
outputs are removed, these jacks may be con-
nected to an external power amplifier.
‹
Subwoofer Output: Connect this jack to
the line-level input of a powered subwoofer. If
an external subwoofer amplifier is used, con-
nect this jack to the subwoofer amplifier input.
›
Video Monitor Outputs: Connect this
jack to the composite or S-Video input of a TV
monitor or video projector to view the on-screen
menus and the output of any standard video
source selected by the receiver’s video switcher.
fi
Speaker Outputs: Connect these outputs
to the ma or – terminals on your left
and right surround speakers. When making
speaker connections always make certain to
maintain correct polarity by connecting the red
(+) terminals on the AVR 510 to the red (+) ter-
minals on the speakers and the black (–) termi-
nals on the AVR 510 to the black (–) terminals
on the speakers. See page 15 for more informa-
tion on speaker polarity.
fl
Switched AC Accessory Outlet: This
outlet may be used to power any device you
wish to have turned on when the AVR 510 is
turned on with the
System Power Control
button
2
.
‡
Unswitched AC Accessory Outlet: This
outlet may be used to power any AC device.
The power will remain on at this outlet regard-
less of whether the AVR 510 is on or off.
Note: The total power consumption of all
devices connected to the accessory outlets
should not exceed 100 watts.
°
AC Power Cord: Connect the AC plug to
an unswitched AC wall output.
·
Component Video Outputs: Connect
these outputs to the component video inputs of
a video projector or monitor. When a source
connected to one of the two
Component
Video Inputs
ab
is selected the signal will
be sent to these jacks.
a
Video 2 Component Video Inputs:
Connect the Y/Pr/Pb component video outputs
of a set top converter box or other video prod-
uct to these jacks.
b
DVD Component Video Inputs: Connect
the Y/Pr/Pb component video outputs of a DVD
player to these jacks.
c
Remote IR Output: This connection per-
mits the IR sensor in the receiver to serve other
remote controlled devices. Connect this jack to
the “IR IN” jack on Harman Kardon (or other
compatible) equipment.
d
Remote IR Input: If the AVR 510’s front-
panel IR sensor is blocked due to cabinet
doors or other obstructions, an external IR
sensor may be used. Connect the output of
the sensor to this jack.
e
Multiroom IR Input: Connect the output of
an IR sensor in a remote room to this jack to
operate the AVR 510’s multiroom control system.
f
DVD Video Inputs: Connect these jacks to
the composite or S-Video output jacks on a
DVD or other video source.
g
Video 1 Video Outputs: Connect these
jacks to the RECORD/INPUT composite or
S-Video jack on a VCR.
h
Video 3 Video Inputs: Connect these
jacks to the PLAY/OUT composite or S-Video
jacks on a VCR or other video source.
i
Video 2 Video Inputs: Connect these
jacks to the PLAY/OUT composite or S-Video
jacks on a VCR or other video source.
j
Video 2 Video Outputs: Connect these
jacks to the RECORD/INPUT composite or
S-Video jacks on a VCR.
k
Video 1 Video Inputs: Connect these
jacks to the PLAY/OUT composite or S-Video
jacks on a VCR or other video source.
Optical Digital Inputs: Connect the opti-
cal digital output from a DVD player, HDTV
receiver, LD player or CD player to these jacks.
The signal may be either a Dolby Digital signal,
a DTS signal or a standard PCM digital source.
Coaxial Digital Inputs: Connect the coax
digital output from a DVD player, HDTV receiver,
LD player or CD player to these jacks. The signal
may be either a Dolby Digital signal, DTS signal
or a standard PCM digital source. Do not con-
nect the RF digital output of an LD player to
these jacks.
Digital Audio Outputs: Connect these
jacks to the matching digital input connector
on a digital recorder such as a CD-R or
MiniDisc recorder.
Video 3 Audio Inputs: Connect these
jacks to the PLAY/OUT audio jacks on a VCR
or other video source.
Video 2 Audio Inputs: Connect these
jacks to the PLAY/OUT audio jacks on a VCR
or other video source.
Video 2 Audio Outputs: Connect these
jacks to the RECORD/INPUT audio jacks on a
VCR or other video source.
36
35
34
33
32
31
AVR510 harman/kardon