background image

AVR

29

EN

GL

ISH

Operating Your AVR

Video Troubleshooting Tips

If there is no picture:

check the source selection and video input assignment.

 

check all connections for a loose or incorrect connection.

 

check the video input selection on the tv/display device.

 

press the front-panel resolution button and use the up/down buttons until the 

 

correct video output resolution is selected and a picture appears. the cAncel 

message will also appear. press the down button to view the Accept option, then 

press the ok button.

Additional Tips for Troubleshooting HDMI Connections

turn off all devices (including the tv, the Avr and any source components).

 

unplug the hdmI cables, starting with the cable between the Avr and the tv, and 

 

continuing with the cables between the Avr and each source device.
carefully reconnect the cables from the source devices to the Avr. connect the 

 

cable from the Avr to the tv last.
turn on the devices in this order: tv, Avr, source devices.

 

NOTE: Depending upon the particular components involved, the complexity of 

the required communication between HDMI components may cause delays of 

up to a minute in the completion of some actions, such as input switching or 

switching between SD and HD channels.

Listening to FM and AM Radio

Select the radio source. A screen similar to the one in the illustration below will appear. 

(note: the SIrIuS band uses a different screen.)

AM/FM Radio

FM

87.50

MHz

1

Auto

Menu:

Set Presets:

Presets:

OK

MENU

use  the  up/down  buttons  or  the  remote’s  channel  buttons  to  tune  a  station  (or  

channel for SIrIuS radio), as displayed on the front panel and on-screen display.
the  Avr  defaults  to  automatic  tuning,  meaning  each  press  of  the  up/down  buttons  

scans  up  or  down  the  frequency  band  until  a  station  with  acceptable  signal  strength  

is  found.  to  switch  to  manual  tuning,  in  which  each  press  of  the  up/down  buttons  

steps  through  a  single  tuning  frequency  increment,  press  the  remote’s  menu  button.  

A  slide-in  menu  will  appear.  Select  “mode,”  and  press  the  ok  button  to  toggle  

between automatic and manual tuning modes. 
once you have tuned an fm station, toggling the mode setting also switches the radio 

between  stereo  and  monaural  reception.  (mono  reception  may  improve  reception  of 

weaker stations.)

Preset Stations

you can store a total of 30 stations (Am and fm combined) as presets. when you want 

to save the currently tuned station as a preset, press the ok button, and two dashes will 

flash. use the number buttons to enter the desired preset number.
to tune to a preset station: 

press the left/right buttons.

 

press the skip forward/skip backward transport control buttons.

 

press the menu button and scroll to the desired preset, then press the ok button.

 

enter the preset number using the number buttons. for presets 10 through 30, press 0 

 

before the preset number. for example, to enter preset 21, press 0-2-1.

Listening to SIRIUS Satellite Radio

SIrIuS  Satellite  radio  delivers  a  variety  of  commercial-free  music  from  categories 

including pop, rock, country, r&b, dance, jazz, classical and many more, plus coverage 

of all the top professional and college sports, including play-by-play games from select 

leagues  and  teams.  Additional  programming  includes  expert  sports  talk,  uncensored 

entertainment, comedy, family programming, local traffic and weather, and news from 

your most trusted sources. SIrIuS Satellite radio is available to residents of the u.S. 

(except Alaska and hawaii) and canada.
to listen to SIrIuS Satellite radio, you’ll need to connect a SIrIuS tuner module (sold 

separately) to the Avr’s SIrIuS tuner connector. SIrIuS tuner modules that will work 

with your Avr are available at www.sirius.com. Select a tuner module designated for 

SIrIuS-ready

®

 audio components (also called SIrIuSconnect). A SIrIuSconnect module 

is controlled by the Avr’s internal tuner, including 40 preset SIrIuS station locations and 

remote control. Although you may also use a SIrIuS “plug-and-play” unit with standard 

analog audio connections, you will not be able to enjoy the Avr’s ease of control.

Installing the SIRIUS tuner module

once you’ve purchased a SIrIuS tuner, you’ll need to install it, activate it and subscribe 

to begin enjoying the service: 

using the cable included with the SIrIuS tuner module, plug the module into the SIrIuS 

1. 

tuner connector on the rear of the Avr. 
follow  the  instructions  included  with  the  SIrIuS  tuner  module  to  complete  its 

2. 

installation. note: pay particular attention to the instructions for installing and orienting 

the SIrIuS antenna that is included with the SIrIuS tuner module.
call 1-888-539-SIrI (7474) or visit sirius.com (u.S.) or siriuscanada.ca (canada) to 

3. 

activate your SIrIuS tuner module and subscribe to the SIrIuS service.

To listen to SIRIUS radio

Select SIrIuS radio as the source in one of these ways:

press the Source list button on the front panel. use the up/down buttons to scroll to 

 

“SIrIuS radio” and press the ok button.
press the radio Source Selector button on the remote repeatedly until SIrIuS radio 

 

is selected.

there are four ways to tune a SIrIuS radio channel:

use the up/down buttons or the channel up/down buttons to scan through the channel 

 

numbers.
use  the  left/right  buttons  to  scan  through  any  previously  programmed  preset 

 

stations.
After you have programmed presets, directly enter the preset number (1 through 40) 

 

using the number buttons. for two-digit positions, enter a “0” before the number.
to search for a channel, press the menu button, then use the up/down buttons to cycle 

 

through the following choices: preset, category, All channels or direct entry. press the 

ok button to select one, then use the up/down buttons to search for the channel (for 

direct entry, use the number buttons to enter the channel number), then press the 

ok button.

the current channel number and preset location will appear in the lower line of the Avr’s 

front-panel  message  display.  the  song  title,  artist,  channel  name,  channel  category, 

channel number, preset position (if programmed) and signal-strength bars will all appear 

on the screen when a video display is in use. for traffic and weather channels, the current 

city’s name will appear instead of the channel name.

Preset SIRIUS channels

you can store a total of 40 channels as presets. when the desired channel has been 

tuned, press the ok button, and two dashes will flash on the Avr’s front-panel message 

display. use the number buttons to enter the desired preset number.
to tune to a preset SIrIuS channel:

press the left/right buttons.

 

press the skip forward/skip backward transport control buttons.

 

press the menu button and scroll to the desired preset, then press the ok button.

 

enter the preset number using the number buttons. for presets 10 through 40, press 0 

 

before the preset number. for example, to enter preset 21, press 0-2-1.

0295CSK - HK (x65Series) AVR3650_365_2650_265 CORE OM, WORK18 danny.indd   29

01/07/11   11:34:01

Summary of Contents for AVR 3650































































Reviews: