manualshive.com logo in svg

Harman Kardon AVR 247, Owner'S Manual

The Harman Kardon AVR 247 is an advanced audio/video receiver that delivers immersive sound and stunning visuals. To harness its full potential, make sure to grab the free Reference Manual available for download from our website. This comprehensive manual will provide valuable instructions and insights for optimal usage.

Share
Download
background image

49

ADVANCED FUNCTIONS

Surround Mode

Description

Incoming Bitstream or Signal

Dolby Pro Logic IIx 

This mode is similar to Dolby Pro Logic II Music, including the availability 

• Dolby Digital 2/0/.0 or .1, 2/2/.0 or .1,

Music

of center width, dimension and panorama adjustments. Dolby Pro Logic IIx 

3/2/.0 or .1, EX

Music adds a surround back channel. In addition, it may be selected 

• DTS 2/2/.0 or .1, 3/2/.0 or .1

even when some types of DTS signals are present.

• DTS 96/24
• DTS-ES Matrix
• DTS-ES Discrete
• Analog (2-channel)
• Tuner
• PCM (32kHz, 44.1kHz, 48kHz, 96kHz)

Dolby Pro Logic IIx 

This mode is similar to Dolby Pro Logic II Game, with the added benefit 

• Dolby Digital 2/0/.0 or .1

Game

of a surround back channel.

• Analog (2-channel)
• Tuner
• PCM (32kHz, 44.1kHz or  48kHz)

Dolby Virtual Speaker

Simulates 5.1 channels when fewer speakers are present, or a more 

See below.

Mode Group

enveloping sound field is desired.

Dolby Virtual Speaker

When fewer than five main speakers are present, the Reference 

• Dolby Digital (uses only two-speaker mode

Reference

mode virtualizes the missing speakers with accurate localization.

when signal does not contain center channel 

Select from two- or three-speaker mode, depending on how many 

information)

physical speakers are in your system.

• Analog (2-channel) 
• Tuner
• PCM (32kHz, 44.1kHz or 48kHz)

Dolby Virtual Speaker

Wide mode may be used with two, three, four or five main speakers to 

• Dolby Digital (number of channels available 

Wide

widen the front soundstage by virtualizing the locations of the left and 

varies by number of channels in signal)

right speakers.

• Analog (2-channel)  
• Tuner
• PCM (32kHz, 44.1kHz or 48kHz)

DTS Digital

Using a different encoding/decoding method than Dolby Digital, it also 

• DTS 1/0/.0 or .1, 2/0/.0 or .1, 3/0/.0 or .1,

provides up to five discrete main channels, plus an LFE channel.

3/1/.0 or .1, 2/2/.0 or .1, 3/2/.0 or .1

• DTS-ES Matrix (played as 5.1)
• DTS-ES Discrete (played as 5.1)

DTS-ES Matrix

DTS Extended Surround adds a single surround back channel to DTS 5.1 

• DTS-ES Matrix

digital surround sound. The Matrix version includes the surround back 
channel information “matrixed” into the left and right (side) surround 
channels, for compatibility with 5.1-channel systems.

DTS-ES Discrete

DTS-ES Discrete is another Extended Surround mode that adds a surround  • DTS-ES Discrete
back channel, but this information is encoded discretely on the disc, and 
is not derived from information contained in the surround channels.

DTS Stereo

Delivers a 2-channel downmix of DTS Digital materials, or presents 

• DTS 1/0/.0 or .1, 2/0/.0 or .1, 3/0/.0 or .1,

a matrix-encoded surround presentation.

3/1/.0 or .1, 2/2/.0 or .1, 3/2/.0 or .1

• DTS 96/24  
• DTS-ES Matrix   
• DTS-ES Discrete 

DTS Neo:6

DTS Neo:6 analog processing is available with DTS and DTS 96/24

See below.

Mode Group

signals and 2-channel analog or PCM signals to create a 3-, 5- or 6-channel
presentation.

AVR247om.qxd  7/10/07  1:05 PM  Page 49

Summary of Contents for AVR 247













































































Reviews:

No comments

Related manuals for AVR 247

Radionics D6500 Installation Manual preview
D6500
Brand: Radionics Pages: 73
Harman Kardon HK 3480 Owner'S Manual preview
HK 3480
Brand: Harman Kardon Pages: 20
Harman Kardon HK 3380 Owner'S Manual preview
HK 3380
Brand: Harman Kardon Pages: 20
Harman Kardon AVR 645 Quick Start Manual preview
AVR 645
Brand: Harman Kardon Pages: 2
Harman Kardon AVR 745 Service Manual preview
AVR 745
Brand: Harman Kardon Pages: 146
Harman Kardon AVR 445 Quick Start Manual preview
AVR 445
Brand: Harman Kardon Pages: 2
Harman Kardon AVR 445 Owner'S Manual preview
AVR 445
Brand: Harman Kardon Pages: 64
Harman Kardon AVR 340 Quick Start Manual preview
AVR 340
Brand: Harman Kardon Pages: 4
Harman Kardon AVR 7200 Service Manual preview
AVR 7200
Brand: Harman Kardon Pages: 187
Harman Kardon AVR 525 Service Manual preview
AVR 525
Brand: Harman Kardon Pages: 187
Harman Kardon AVR 7500 Manual preview
AVR 7500
Brand: Harman Kardon Pages: 10
Harman Kardon AVR 7500 Specification preview
AVR 7500
Brand: Harman Kardon Pages: 2
Harman Kardon TRAFFIC PRO Manual preview
TRAFFIC PRO
Brand: Harman Kardon Pages: 48
Harman Kardon The Counterpoint A-400 Operating And Service Instructions preview
The Counterpoint A-400
Brand: Harman Kardon Pages: 5
Harman Kardon AVR 745 Brochure & Specs preview
AVR 745
Brand: Harman Kardon Pages: 24
Ranger Communications RCI-2950DX Owner'S Manual preview
RCI-2950DX
Brand: Ranger Communications Pages: 11
Webasto Telestart T80 Installation Instructions Manual preview
Telestart T80
Brand: Webasto Pages: 88
Muzak ENCOMPASS LE Quick Start Manual preview
ENCOMPASS LE
Brand: Muzak Pages: 3

Brands by name

Popular brands

Load more brands