background image

 

 

Signature 2.0 

The first step to correct this problem is to turn the 2.0 off using the 

Master Power Switch 

and unplug the unit from the AC wall outlet and 

wait at least three minutes. After the pause, reconnect the AC power 
cord and turn the unit on again. If the system still malfunctions, a system 
reset may clear the problem. To reset the system, press the 

Menu 

button to view the 

Setup

 Menu. Press the 

Menu Control 

button until 

Advanced Setup

 is highlighted. Press the 

Menu Control 

button to go to 

the next screen.  At 

the Advanced Settings

 menu, press the 

Menu 

Control 

button twice until 

SYSTEM RESET

 is highlighted. Press the 

Menu Control 

button again. This will bring up the 

System Reset

 Menu. 

If you wish to exit at this point, press the 

Menu 

button. To proceed with 

the reset, press the 

Menu Control 

button to move the highlighted area 

to the 

Yes

 line, and then press the 

Menu Control 

button. The next 

screen instructs you to proceed by pressing and HOLDING the 

Store 

button until the reset is complete. Follow that instruction by holding the 

Store 

button until the Reset Completed message appears briefly on 

screen and the front panel 

Information Display

. This is your indication 

that the reset has been accomplished, and you may release the 

Store 

button. The system will automatically return to the 

Advanced Settings

 

menu. After a reset the system is returned to the original factory default 
settings, the microprocessor system is re-initialized. Press the 

Menu 

button twice to return to normal operation. 

 

 

 

 

JBL

 

Model Instructions 

Comment 

 

 

 

DCR600 

To correct this problem, first unplug the unit from the AC wall outlet and 
wait at least three minutes. After the pause, reconnect the AC power 
cord and check the unit’s operation. If the system still malfunctions, a 
system reset may clear the problem. To clear the DCR600’s entire 
system, first put the unit in Standby by pressing the 

System Power 

Control 

button. Next, press and hold the 

Tone Mode 

and the 

FM Mode 

Selector 

buttons for three seconds. The unit will turn on automatically 

and display the 

RESET

 message in the Main Information Display 

 
 

DCR600II 

To correct this problem, first unplug the unit from the AC wall outlet and 
wait at least three minutes. After the pause, reconnect the AC power 
cord and check the unit’s operation. If the system still malfunctions, a 
system reset may clear the problem. To clear the DCR600II’s entire 
system, first put the unit in Standby by pressing the 

System Power 

Control 

button. Next, press and hold the 

Tone Mode 

and the 

FM Mode 

Selector 

buttons for three seconds. The unit will turn on automatically 

and display the 

RESET

 message in the Main Information Display 

 
 

DVD600 

In the event that you forget the password for the DVD600, you may reset 
it to the factory default by following this procedure: In Standby mode, 
press the 

Search Back 

and 

Skip Forward 

buttons on the front panel 

simultaneously for more than 3 seconds. The 

Information Display 

will 

light, and a test pattern will appear on your TV. Press 

Power On 

to 

proceed. 

PASSWORD RESET ONLY 

DVD600II 

In the event that you forget the password for the DVD600II, you may 
reset it to the factory default by following this procedure: In Standby 
mode, press the 

Search Reverse 

and 

Skip Forward 

buttons on the 

front panel simultaneously for more than 3 seconds. The 

Information 

Display 

will light, and a test pattern will appear on your TV. Press the 

System Power Control 

to proceed.

 

 

PASSWORD RESET ONLY 

 

Summary of Contents for AVR 210












Reviews: