Harman Kardon AVR 1565, Owner'S Manual

Page: 31 / 42

31
AVR 1565/AVR 1566
EN
GL
ISH
Surround Mode Description Incoming Bitstream or Signal
dtS digital using a different encoding/decoding method from dolby digital, dtS digital also
provides up to five discrete main channels, plus an lFe channel.
dtS 1/0/.0 or .1, 2/0/.0 or .1, 3/0/.0 or .1, 3/1/.0 or .1, 2/2/.0 or •
.1, 3/2/.0 or .1
dtS-eS Matrix (played as 5.1)
•
dtS-eS discrete (played as 5.1) •
dtS-hd dtS-hd is a high-definition audio format that complements the high-definition
video found on blu-ray disc and hd-dVd discs. It is transmitted using a dtS
core with high-resolution extensions. even when only dtS 5.1 surround sound is
desired (or available, if the multizone system is in use), the higher capacity of high-
resolution discs serves up dtS at twice the bit rate used on dVd-Video discs.
blu-ray disc or hd-dVd discs encoded with dtS-hd modes, •
delivered via hdMI connection
dtS-hd Master Audio dtS-hd Master Audio technology delivers bit-for-bit reproductions of studio master
recordings for an incredibly accurate performance.
blu-ray disc or hd-dVd discs encoded with dtS-hd Master •
Audio technology, delivered via hdMI connection
dtS Stereo delivers a two-channel downmix of dtS digital materials or presents a matrix-
encoded surround presentation.
dtS 1/0/.0 or .1, 2/0/.0 or .1, 3/0/.0 or .1, 3/1/.0 or .1, 2/2/.0 or •
.1, 3/2/.0 or .1
dtS 96/24
•
dtS-eS Matrix •
logic 7
Mode group
A harman proprietary technology, logic 7 technology enhances two-channel and
matrix-encoded recordings by deriving separate information for the surround
back channels. It provides more accurate placement of sound, improves panning
and expands the sound field, even when used with 5.1-channel systems. logic 7
technology uses 96khz processing and is available in 5.1 mode. three variants are
available.
See below
logic 7
Movie
especially suited to two-channel sources containing dolby Surround or matrix
encoding, logic 7 Movie mode increases center-channel intelligibility.
Analog (two-channel) •
tuner •
pcM (32khz, 44.1khz, 48khz, 96khz) •
logic 7
Music
the AVr is programmed at the factory to default to this mode for two-channel
signals. logic 7 Music mode is well suited to conventional two-channel music
recordings.
Analog (two-channel) •
tuner •
pcM (32khz, 44.1khz, 48khz, 96khz) •
logic 7
game
use logic 7 game mode to enhance enjoyment of video-game consoles. Analog (two-channel) •
tuner •
pcM (32khz, 44.1khz, 48khz, 96khz) •
5-channel Stereo useful for parties, the left- and right-channel information is played through both
the front and surround speakers on each side, while the center speaker plays a
summed mono mix.
Analog (two-channel) •
tuner •
pcM (32khz, 44.1khz, 48khz, 96khz) •
2-channel Stereo turns off all surround processing and plays a pure two-channel signal or a
downmix of a multichannel signal. the signal is digitized and bass management
settings are applied, making it appropriate when a subwoofer is used.
Analog (two-channel; dSp downmix available for multichannel) •
tuner •
pcM (32khz, 44.1khz, 48khz, 96khz) •
Table A9 – Surround Modes (cont.)
Appendix
0293CSK - HK (x65Series) AVR1565_1566 OM [HKP1990], WORK03.indd 31 29/06/11 12:17:14