Harman Kardon AVR 151/230C, Service Manual

Page: 100 / 131

Summary description M24Cxx-W, M24Cxx-R, M24Cxx-F
6/34
1 Summary description
These I
2
C-compatible electrically erasable programmable memory (EEPROM) devices are
organized as 8192 × 8 bits (M24C64-x) and 4096 × 8 bits (M24C32-x).
Figure 1. Logic diagram
I
2
C uses a two-wire serial interface, comprising a bi-directional data line and a clock line.
The devices carry a built-in 4-bit Device Type Identifier code (1010) in accordance with the
I
2
C bus definition.
The device behaves as a slave in the I
2
C protocol, with all memory operations synchronized
by the serial clock. Read and Write operations are initiated by a Start condition, generated
by the bus master. The Start condition is followed by a Device Select Code and Read/Write
bit (RW) (as described in
Table 2 ), terminated by an acknowledge bit.
When writing data to the memory, the device inserts an acknowledge bit during the 9
th
bit
time, following the bus master’s 8-bit transmission. When data is read by the bus master, the
bus master acknowledges the receipt of the data byte in the same way. Data transfers are
terminated by a Stop condition after an Ack for Write, and after a NoAck for Read.
Table 1. Signal names
E0, E1, E2 Chip Enable
SDA Serial Data
SCL Serial Clock
WC Write Control
V
CC
Supply Voltage
V
SS
Ground
AI01844c
3
E0-E2 SDA
VCC
M24C64-W
M24C64-R
M24C64-F
M24C32-W
M24C32-R
M24C32-F
WC
SCL
VSS
Harman Kardon AVR 151 Service Manual
Page 100 of 131