Harman Kardon AVR 146 Service Manual Download Page 93

Page: 93 / 172

Excel Semiconductor inc.

ES29LV800E

8Mbit(1M x 8/512K x 16)

CMOS 3.0 Volt-only, Boot Sector Flash Memory

GENERAL FEATURES

• Single power supply operation

- 2.7V -3.6V for read, program and erase operations

• Sector Structure

- 16Kbyte x 1, 8Kbyte x 2, 32Kbyte x 1 boot sectors
- 64Kbyte x 15sectors

• Top or Bottom boot block

- ES29LV800ET for Top boot block device
- ES29LV800EB for Bottom boot block device

• Package Options

- 48-pin TSOP
- 48-ball FBGA ( 6 x 8 mm )
- Pb-free packages
- All Pb-free products are RoHS-Compliant

• Low Vcc write inhibit
• Manufactured on 0.18um process technology
• Compatible with JEDEC standards

- Pinout and software compatible with single-power
supply flash standard

DEVICE PERFORMANCE

• Read access time

- 70ns / 90ns / 120ns

• Program and erase time

- Program time : 6us/byte, 8us/word ( typical )
- Sector erase time : 0.7sec/sector ( typical )

• Power consumption (typical values)

    - 200nA in standby or automatic sleep mode
  - 7mA active read current at 5 MHz
  - 15mA active write current during program or erase

• Minimum 100,000 program/erase cycles per sector

• 20 Year data retention at

125

SOFTWARE FEATURES

• Erase Suspend / Erase Resume
• Data# poll and toggle for Program/erase status
• Unlock Bypass program
• Autoselect mode
• Auto-sleep mode after t

ACC

+ 30ns

HARDWARE FEATURES

• Hardware reset input pin ( RESET#)

   - Provides a hardware reset to device
   - Any internal device operation is terminated and the
    device returns to read mode by the reset

• Ready/Busy# output pin ( RY/BY#)

   - Provides a program or erase operational status
    about whether it is finished for read or still being
    progressed

• Sector protection / unprotection ( RESET# , A9 )

   - Hardware method of locking a sector to prevent
    any program or erase operation within that sector
   - Two methods are provided :
       - In-system method by RESET# pin
       - A9 high-voltage method for PROM programmers

• Temporary Sector Unprotection ( RESET# )

- Allows temporary unprotection of previously
protected sectors to change data in-system

AVR146

harman/kardon

Summary of Contents for AVR 146













































































































































































Search results

Summary of Contents for AVR 146

Reviews:

Brands by name

Popular brands

Harman Kardon AVR 146, Service Manual

Search results

Summary of Contents for AVR 146

Reviews:

Brands by name

Popular brands