Harley Benton HB-20MFX, User Manual

Page: 15 / 32

1 [INPUT]
1/4" jack socket to connect your instrument.
2 [TUNER]
Button to turn the built-in tuner on or off. When switched on, the display above the button shows the note value of
individually played notes. If the red and yellow LEDs light up to the left of the display, the string is tuned way too low.
If only the yellow LED lights up, the string is tuned a little too low. If the red and yellow LEDs light up to the right of
the display, the string is tuned way too high. If only the yellow LED lights up, the string is tuned a little too high.
When the green LED lights up, the tuning of the string corresponds exactly to the displayed note value.
3 [VOICE]
Button to activate the voicings CLN (clean), CRH (crunch), LEAD, OD1 (overdrive 1) and OD2 (overdrive 2). The LEDs to
the right of the button indicate the activated voicing.
4 [GAIN]
Input gain control.
5 [VOLUME]
Control to adjust the volume of the instrument channel. In combination with effects, [VOLUME] can be considered as
a dry signal level control.
6 [TREBLE]
Treble control.
7 [MIDDLE]
Mids control.
Connections and controls
HB-20MFX | HB-40MFX
15
Guitar Combo