Harken Riggers Winch 200, Installation Manual, Page: 10 / 23

10 Riggers Winch 200 01/03/19
Inspection
INSPECT BEFORE EACH USE
A formal inspection of the winch and its connection to the structure must be performed at least annually by a
knowledgeable person other than the user. The inspection should be recorded in an inspection and maintenance log.
BEFORE EACH USE
Inspect winch and self-tailing jaws for degradation, cracks, or wear that may affect locking strength and operation.
Check lifting rope to make sure that it is free from wear. If in doubt, replace with a suitably strong rope.
HEAVY USE/HARSH ENVIRONMENT
In addition to inspection before each use, a detailed monthly inspection of the unit is recommended. If unit is
under heavy use and/or in a harsh environment inspect and lubricate frequently.
Maintenance
WASH
Wash winch frequently with fresh water.
Do not allow cleaning products or other caustic solutions to come into contact with winch, especially anodized,
chrome-plated, or plastic parts. Do not use solvents, polishes, or abrasive pastes on logos or winch stickers.
MAINTENANCE SCHEDULE
Winch must be completely overhauled, cleaned, and lubricated at least every 12 months. Harsh environment and/
or heavy use may require more frequent maintenance.
After inspection, replace worn or damaged components with genuine Harken parts. Do not replace or modify a
Harken
®
Riggers Winch 200 with a part that was not designed for it.
CAUTION! Periodic service must be carried out regularly. Lack of adequate maintenance shortens the life
of the Harken
®
Riggers Winch 200, can cause serious injury and also invalidate the warranty. Installation
and maintenance of Harken
®
Riggers Winch 200 must be carried out exclusively by trained personnel.