9
L
Installation and Maintenance Manual - Mod.E
Powered Performa
™
Winch
40.2 ST EL
Winch installation procedure
Carry out the
Procedure
, then install the winch on the deck in the chosen position.
NOTICE
Before drilling the deck, check the space available below deck for the flange and the motor
A.
Position the base of the winch on the deck and mark the position of the holes or use the drilling
cut-out template at the point where you have decided to place the winch.
B.
Remove the winch and drill the five 6.2 mm diameter holes.
Below is a reduced scale diagram.
The drilling cut out template is available on the Harken
®
website, www.harken.com
final pinion
position
¯123
35¡
105¡
50¡
70¡
50¡
50¡
¯6.2
n¡5
Winch outside ¯157
¯80 cut out for
powered winches
final pinion
position
Ø123
35°
105°
50°
70°
50°
50°
Ø6.2
n°5
Winch outside Ø180
Ø80 cut out for
powered winches
Winch STP
Winch STQP
