8
L
Installation and Maintenance Manual - Mod.E
Powered Performa
™
Winch
40.2 ST EL
Procedure
To install the winch, remove the drum and use Socket Head (SH) bolts.
Tools needed
One medium flat-bladed screwdriver
To identify the various parts, refer to the exploded view at the end of this Manual.
Torque to apply when assembling
Install the winch on the deck in the position you have chosen, keeping in mind the limits described
on page 5.
1. Pull out the disconnect rod n°28
3. Slide off the assy socket n°26 and the cover
n°27. Pay attention to the o-ring in the socket.
5. Remove the stripper arm n°24 by
rotating and lifting it.
6. Lift off the drum n°21
2. Unscrew the central screw ( 2Nm/18 in-lb)
4. Unscrew the three screws n°25
( 4Nm/35 in-lb)
