8
Performa
™
Winch
40.2 PTP
Installation and Maintenance Manual- Mod.C
Disassembly procedure
Tools needed
One medium flat-bladed screwdriver
A number five hex key
Rags
To identify the various parts refer to the exploded view at the end of this Manual.
Torque to be applied in assembly phase
Carry out procedure
as shown in the paragraph on winch installation and then do the following:
6. Slide out the central shaft n°18
7. Unscrew the 6 hex screws n°15
( 8Nm/71 in-lb)
4. Completely unscrew the three screws n° 24
5. Remove the socket support n°20
