MKIV hydraulic unit 3
18
Assembly Foils/Connectors
Tighten screws into connector holes.
Make sure a drop of red Loctite
®
adhesive
entered each screw hole. If not, apply to
screw.
Use bushings, connector, wedge, and
adhesive in other screw hole and insert
into other foil. Use 1 to 1
1
/
4
ml of adhesive.
Use “ml”
marks to
estimate 1
to 1
1
/
4
ml of
adhesive
Stop when you see a small
amount of adhesive enter
one screw hole
Unit
Adhesive
3
1
to
1
1
/
4
ml
Inject a small amount of adhesive
into middle hole.
Tip: When you see a small amount
of adhesive enter one screw
hole, stop. You have applied
enough adhesive.
Red Loctite
Loctite is a registered trademark of Henkel AG & Company KGaA.
