MKIV Ocean Unit 3
5
Preassembly
Rigging Parts Check/Tools
Tools You Will Need
1. Long tape measure
6. Side cutters
11. Rigging or black tape
2. Short tape measure
7. Rat-tail file
12. Center Punch
3. Power drill
8. Hex keys (provided)
13. Hammer
4. Drill bit – 1/8" (3 mm)
9. Slotted/phillips screwdrivers
5. Hacksaw
10. Needle-nose pliers
10
11
12
8
7
6
5
3
2
1
13
4
9
All Units.
Harken toggle
(sold separately).
1. Harken toggle assembly required. Sold separately.
2. Mating turnbuckle components, with eye at lower
end, must be purchased separately.
3. Headstay might require cutting and shortening to fit
Harken toggle. .
4. Rod rigging requires Harken rod adapter stud.
Toggles
Furling line is not included with furling unit. Purchase 12 mm (7/16") low - stretch
polyester double - braid line. Line length should be equal to the length of the
boat, plus the length of the foot of the largest genoa, plus 2 m (6').
Line Diameter/Length
WARNING! A stay that is old or damaged can
break suddenly, causing an accident. Headstay
condition should be checked by a professional
rigger before reusing.
Unit
Part No.
3
7313.21 3/4
7313.21 7/8
7513.21 1
7513.21 1 1/8
Long link
plate w/toggle
Rod Rigging.
Harken rod adapter
stud required
(sold separately).
Unit
Part No.
UNF
thread
3
7426 -22
3/4"
7427 -30
7/8"
7428 -40
1"
7429 -48
1 1/8"
Rod adapter stud
Unit
Part No.
3
7413.20 3/4
7413.20 7/8
7513.20 1
7513.20 1 1/8
Jaw/jaw toggle w/
short link plate
Line not included
