Harken HYDRO POWER UNIT 1, Installation And Operation Manual

Page: 10 / 28

10 Hydro 1
Port Indentification
Hydro 1: HPU manifold contains four (4) valve ports, making valve port selection for a given function simple. HPU remote manifold
attaches via hose to port on HPU.
Hydraulic Installation
Configuration
The stock configuration of Hydro 1 is internally plumbed such that valves are pre-assigned to a manifold and motor. This is illustrated
in the Function Assignment Table. Hydro 1 unit uses valves 1-4 with manifold 1 and motor 1.
Function Assignment
The Hydro 1 unit is equipped with either an attached or a remote manifold per design specification. Both manifold styles have four (4)
valve stations corresponding with four (4) ECB switches. Assign each function to its own set of valve ports. Record the function name
in the Function Assignment Table below. Refer to this information when connecting the electric switches. For easy reference, label the
hydraulic hoses in accordance with the valve. For example: label Valve Station 1 hoses for your attached manifold "VS1A and VS1B".
Function
Name
Valve
Station Number
Attached
Manifold Number
Remote
Manifold Number Motor
VS1 A1 — 1
VS2 A1 — 1
VS3 A1 — 1
VS4 A1 — 1
VS1 — R1 1
VS2 — R1 1
VS3 — R1 1
VS4 — R1 1
Function Assignment Table
Attached manifold with 1 valve.
Remote manifold pressure port