12
2/2.5 Carbon Furler
December 2001
COMMISSIONING
Tying Soft Attachment Lines
You must lace line around the furler/halyard swivel three times
when attaching the sail or halyard.
Harken recommends us of a Hunter's Bend. This knot can
be highly tensioned without slipping and like a bowline can
be untied afterwards. There are other bends and knots that
will also work.
Lace line three times around the torque tube/halyard swivel
to capture sail or halyard. After lacing line, tie ends on side
opposite sail.
1
Form a loop in line that comes from left tunnel. Below this,
form a second loop with line from the right tunnel.
2
Twist loop clockwise and arrange ends of line so they are
below standing loops as shown.
