TIGHT RADIUS SYSTEM
TR31
WORK SECURELY AND SAFELY
The Tight Radius rail and trolley system is designed to work as a movable anchorage point for fall restraint
applications. Straight rails can be bent to accommodate directional changes up to a 350 mm radius. Machined
corners up to 200 mm radius bends are available for both horizontal and vertical transitions.
TROLLEY DESIGN
• Strong: tested to 1200 kg (2645 lb)
• Complies with 2x MCA requirements
• Compact: minimum intrusion on narrow
deck and restricted work areas
• Multidirectional load bearing
• Anodized for maximum
corrosion resistance
RAIL DESIGN
• Vertical and horizontal
operating planes
• 1.3 m unsupported span
• High-strength, marine grade
6061-T6 aluminum rail
• Anodized for maximum protection
• Countersunk M10 fasteners
for fl ush fi tting
BRAKE TROLLEY DESIGN
• Screwpin on trolley keeps it in
position when not in use
DELRIN
®
ROLLERS
• No lubrication required
• Low friction
• Smooth movement
• Roller fully supported on both ends
TIGHT RADIUS SYSTEM
The Tight Radius rail and trolley system
can be used for fall restraint. It is
independently tested and CE certifi ed
under EN795.2012 Type D, meets
ANSI Z359, and is OHSA compliant.
