Hardy HI6800 Series, User Manual

Page: 63 / 121

Chapter 5 – Configuration
Hardy H6800 Series Application Controllers User Guide 63
5.3 Understanding the Operation Menu
The HI6800 Series Application Controller parameters are organized into the categories on
the Operation Menu. Each screen has a disk and menu icons at the top right of the screen
and an information icon at the top left that shows online help for the displayed screen.
•
After configuring one or more parameters on a screen, press the disk icon to apply and
save the parameters.
•
Press the menu icon to return to the Operation Menu.
Table 5-2. Parameter Categories on the Operation Menu
Category Description See Section
Setup Parameter : configures the weight measure unit, graduation size, decimal point load cell capacity,
motion tolerance, and instrument and operator IDs.
5.5.1
Filter : configures the WAVESAVER frequency and number of averages, and WA variation
and motion thresholds.
5.5.2
Tare/Zero : configures the auto-zero function, zero and auto zero tolerances, and tare weight. 5.5.3
Communication : configures the network IP address for the application controller connected to the
network.
5.5.4
Security : enables passwords to protect unauthorized access to certain screens. 5.5.5
Display : configures the display brightness to fit you and your environment, and select which home
screens you want to cycle through.
5.5.6
Calibration C2 Calibration : calibrates the scale without using a test weight. 5.6.1
Traditional Cal : calibrates the scale using two test weights 5.6.3
Multipoint Cal : calibrates the scale using three-to-five test weights, providing the most accurate
method for a non-linear calibration.
5.6.4
Option Digital I/O : shows the baseboard digital input/output. 5.7.1
Metrology : configures approval options and warmup delay time to meet certification standards. 5.8
Option Card Setup : configures specific option cards available to the system. 5.10
Diagnostics IT Test : troubleshoots and diagnoses your weighing system. 5.9
App Configures specific applications for the option cards available to the system. ??
System Info Shows the hardware information about the application controller, and display, and installed option
boards. Swipe horizontally to view wiring diagrams.
—
Manual Displays an online version of the user manual. —