Hardy Floor Scales
18
FIG. 12 REMOVING THE SUMMING BOX LID
Step 4.
After removing the 8 hex bolts, carefully
set them aside for reassembly (Step 17).
You may now remove the lid from the
junction box chassis so that you can see all
the wiring from the load sensors and to the
instrument/indicator. (See Fig. 13)
NOTE:
The HI 6011 Summing box is pre-wired and sealed.
You should only remove the cover if you need access
to the load cell cabling and only then if you are
replacing a load cell.
FIG. 13 A HARDY HI 6011 SUMMING BOX
WITH THE LID REMOVED (WITHOUT LOAD
CELL CABLING)
Summary of Contents for HIFS-3030-01-PS-T
