Hardkernnel ODROID-C2 User Manual Download Page 75

Page: 75 / 95

ODROID C2 USER MANUAL

USB-DC Plug Cable 2.5x0.8mm

This accessory is typically used to provide power to the C2 using

a power supply that has an USB port. These power supplies (or char-

gers) could include units that convert AC power to DC power trans-

formers or battery packs. The image below shows both the USB-DC

plug cable and a typical LiPo battery pack. Ensure that the power

supply provides clean power, rated at: 5V, 2.0+ Amps.

USB-DC plug cable USB-DC plug cable usage

USB audio adapter

Attach the USB-powered audio adapter to the ODROID-C2. Af-

ter a few moments, check to see if the device is detected:

$ lsusb

...

Bus 001 Device 003: ID 0d8c:000c C-Media Electronics, Inc. Audio

Adapter

...

This adapter is based on the CM108AH single-chip USB audio

solution, and is capable of stereo output. It includes the dual DAC/

headphone amplifier, ADC, microphone booster, PLL, regulator, and

USB transceiver.

While the setup can be tested with headphones connected to the

headphone port on the adapter, one can also test it with a USB-pow-

ered stereo speaker set as shown below.

USB audio adapter with USB-powered speakers

Chapter 4

Summary of Contents for ODROID-C2
































































































Search results

Summary of Contents for ODROID-C2

Reviews:

Related manuals for ODROID-C2

Brands by name

Popular brands

Hardkernnel ODROID-C2, User Manual

Search results

Summary of Contents for ODROID-C2

Reviews:

Related manuals for ODROID-C2

Brands by name

Popular brands