8
ODROID C2 USER MANUAL
The WiFi USB dongle can be enumerated with the following com-
mand:
odroid@odroid64:~/zBU$ lsusb
Bus 001 Device 005: ID 0bda:8176 Realtek Semiconductor Corp.
RTL8188CUS 802.11n WLAN Adapter.
MicroSD Card
Align the metal strips of the microSD card with the pins of the mi-
croSD card connector, and slowly push it in until it clicks in place. Be
gentle. If you are unable to push it in, it may be misaligned. Recheck
and flip the microSD card if you notice a wrong insertion direction. The
image on the following page shows a properly mounted microSD card.
eMMC Module
Align the eMMC 5.0 module and the eMMC connector on the
ODROID-C2 board, using the white rectangle on the PCB as a guide.
The female portion of the eMMC module should line up with the male
connector on the board. Slowly push it in until it clicks in place. Be
gentle. If you are unable to push it in, it may be misaligned. Recheck
and turn the eMMC module if you notice a wrong insertion direction.
The writing on the card will be exposed after insertion. The image on
the following page shows the eMMC module when mounted.
LED status
The ODROID-C2 includes several LED lights that indicate the
status of the device:
The
red
LED
•
Is on when power to the device is available
The
blue
LED
•
Is on (solid light) when the bootloader is running
The
blue
LED
•
Blinks slowly when the kernel is running, like a heartbeat
The
blue
LED
•
Blinks quickly when the kernel is in panic mode
Chapter 1
