64
ODROID XU4 USER MANUAL
iProduct
3 ASM1051
iSerial
1 0123456789ABCDEF0124
bNumConigurations 1
…
Device can operate at Full Speed (12Mbps)
Device can operate at High Speed (480Mbps)
Device can operate at SuperSpeed (5Gbps)
bFunctionalitySupport 1
Lowest fully-functional device speed is Full Speed (12Mbps)
bU1DevExitLat
10 micro seconds
bU2DevExitLat
2047 micro seconds
…
As you can see, the docking system uses the ASMedia‘s ASM1051E
single-chip based SuperSpeed USB (USB 3.0) to Serial ATA3 bridge.
Follow these steps to use it:
• Shutdown the XU4 and turn the power off
• Attach the docking system to the XU4 with the included USB3
cable
• Insert the SATA storage device (HDD/SSD) with its SATA inter
-
face aligned with the receptacle in the docking system
• Gently press down the storage device so the SATA connectors
connect well and the storage device sits irmly in the docking system
• Turn on the power to the XU4 and let it complete the boot up
process.
Figure 27 shows the installation of new 1TB HGST Travelstar
2.5” SATA3 HDD suitable for laptops. It worked well with SATA3 SSDs
too, such as the PNY 240GB XLR8 model. Some older desktop SATA2
desktop-class HDDs may also work.
Docking system with SATA HDD storage device attached to XU4
A brand new storage device, if unformatted, will not be automat-
Chapter 4