18. Clean the permanent screen filter mounted in the coolant tank.
19. Clean the coolant tank.
20. Shake out the metal chips from the chip basket.
21. Wash the coolant tank, chip basket, and covers with a cleaner recommended by the coolant
manufacturer. Flush the cleaner from the coolant tank and clean as recommended.
22. Apply pipe sealant to the drain plug and thread it into the tank drain.
23. Replace the coolant tank covers.
24. Install the chip basket in the coolant tank.
25. If working with a chip conveyor coolant tank:
A) Support the left end of the chip conveyor.
B) Roll the chip conveyor into the coolant tank.
C) Secure the chip conveyor with four screws "A", Figure 2.21.
- or -
If working with a coolant tank without a chip conveyor on a T-51 or T-65 lathe
D) Set tank liner "C", Figure 2.22, into position.
E) Secure the tank liner with four screws "B".
M-507C
2-19
Figure 2.29 - Coolant Tank with Covers Removed
(T-42 Lathe without Chip Conveyor)
TI5790
Coolant
Channels
Coolant
Nipple
Channel
Plug
Summary of Contents for T-51
Page 8: ... NOTES vi M 507C ...
Page 50: ... NOTES 1 42 M 507C ...
Page 84: ... NOTES 2 34 M 507C ...
