Hardi NAVIGATOR 4000 Instruction Book Download Page 108

Page: 108 / 116

8 - Technical specifications

106

Tyre Pressure

Tyre pressure depends on:

•

Actual axle load.

•

Tyre size.

•

Actual speed of the sprayer.

This means that it is often not possible to drive a fully loaded sprayer at maximum speed, when having narrow wheels
mounted.

NOTE! Be aware of specific data for your sprayer.

WARNING! If changing tyres, always use tyres with minimum load index as specified.

€

DANGER! Never inflate tyres to more than the pressure specified in the table. Over-inflated tyres can explode causing
severe personal injuries!

10 km/h

20 km/h

30 km/h

40 km/h

Tyre size (“)

Load index

Max axle
load (kg)

Tyre pressure
(bar)

Max axle
load (kg)

Tyre pressure
(bar)

Max axle
load (kg)

Tyre pressure
(bar)

Max axle
load (kg)

Tyre pressure
(bar)

18.4x38

157 A8

11810

2.5

9030

2.5

8750

2.5

8250

2.5

520/85x42

167 A8

14720

2.5

11740

2.5

11420

2.5

10900

2.5

12.4x46

146 A8

7080

2.5

6720

2.5

6360

2.5

6000

2.5

14.9x46 159B

11920

2.5

11140

2.5

10360

2.5

9580

2.5

Summary of Contents for NAVIGATOR 4000





















































































































Search results

Summary of Contents for NAVIGATOR 4000

Reviews:

Brands by name

Popular brands

Hardi NAVIGATOR 4000, Instruction Book

Search results

Summary of Contents for NAVIGATOR 4000

Reviews:

Brands by name

Popular brands