Hardi FALCON Boom HY, Operator'S Manual

Page: 25 / 40

23 HARDI ® FALCON BOOM OPERATOR‘S MANUAL
8.2 (A) Greasing The H-Frame And Center Frame
Every 8 hours (daily) new grease should be applied to the wear sur-
faces on the H-Frame and center frame (Fig. 9).
1. Apply grease to the inner and outer wear surfaces of the lower
portion of the H-Frame with the boom in the transport position.
2. Apply grease to the inner and outer wear surfaces of the upper
portion of the H-Frame with the boom unfolded and lowered all the
way down.
3. Apply grease to all the center frame skid plates.
Every 50 hours the grease on the H-Frame and center frame should be
completely cleaned off with a degreasing solvent and new grease
applied. Follow the above steps when doing this.
Fig. 9
Upper & Lower
H-Frame Skid Plates
run vertically against
Wear Surfaces
(Outer Right side
shown - Grease left
side and both inner
Wear Surfaces behind
H-Frame also)
Center Frame
Skid Plates