4
1. Press down the spindle locking
button and unscrew the nut
2. Choose the suitable collet
and put the black nut
3. Insert the bits you need, hold the
lock button and screw on the nut
tightly.
4. Release the spindle locking
button.
ATTENTION:
Different accessories fit different collets, If the accessories
come off easily, please replace another suitable collet.
How to fit a sanding band
1. Align the sanding drum and band
2. Press the band into the drum and twist the top of
the drums crew to adjust the tightness
How to fit the cutting disc
1. Twist off the top of the
wheel mandrel
2. Put the cutting disc on the
top of the wheel mandrel
(close to circle)
3. Twist the top of the slim
end into the mandrel
How to Use
