ENGLISH
13
ASSEMBLY
1. Fit leg frame A and leg frame B with the screws (4), washers (5) and locknuts (6).
2. Fit the handles (16) and sliding bar with the bolts (17) and locknuts (18).
3. Fit the crossbars (3) and leg frames (2) with the bolts (7), washers (8) and nuts (9).
4. Fit the leg frames (2) in the sliders. Match the holes in the sliders with the holes in the leg
frames.Insert the bolts (10) and washers (11) from the outside of the base and insert the washers
(8) and locknuts (12) from the inside. See line-drawing instruction. Tighten the screw joints with a
screwdriver and spanner.