ENGLISH
12
Before installing
Insert the batteries (not included) before installing the appliance.
Installation
1.
Remove the existing door eye, or drill a
hole (Ø 14 mm) in the door at eye level.
Place the washer between the back of the
camera and the door and insert the camera
through the door from outside. Ensure that
the arrow on the front of the camera points
upwards.
2.
Fit the mounting plate on the end of the
lens and screw the grommet on the thread
on the camera. Tighten with the supplied
spanner so that the mounting plate locks to
the door. Check that the arrow on the
mounting plate points upwards.
3.
Connect the data cable to the connection
on the back of the display. Put any surplus
cable in the recess on the back of the
display.
4.
Hang the display on the hook at the top of
the mounting plate and lock in place with
the locking screw.
Hook
Screw
Door
