Hard Head 017295, Operating Instructions Manual

Page: 21 / 23

EN
21
ASSEMBLY
• Two persons are required to assemble the
storage unit.
• Do not assemble the product if any parts
are missing or damaged.
• Contact your dealer if any parts are
damaged or missing, or if you have any
questions.
• Can also be assembled as a workbench.
TOOLS
The following tools are needed to assemble
this storage unit.
• Rubber mallet
• Hammer
ALTERNATIVE 1: SHELF
1. Fasten one of the short shelf supports
(C) in the two key-shaped holes on one
of the angle brackets (A). Tap in the pins
at the bottom in the key-shaped holes by
tapping close to the joint with a rubber
mallet.
2. Repeat for the next angle bracket (A), to
form a side piece..
FIG. 2
3. Fit a long shelf support (B) on the side
piece. Tap in the pins at the bottom in the
key-shaped holes by tapping close to the
joint with a rubber mallet.
NOTE:
Avoid tapping too hard so as not to damage
the supports.
4. Repeat step 4 with another long shelf
support (B), one short shelf support (C)
and angle brackets (A). The bottom part is
now ready.
FIG. 3
SAFETY INSTRUCTIONS
• Must be assembled by an adult – contains
small and sharp parts.
• The product is only intended for indoor use.
• Use a suitable lubricant to simplify joining
the angle brackets and bars.
• When using a hammer, protect surfaces
with a cloth or block of wood.
• The pins should rest in the bottom of the
key-shaped holes. Tap on the flat part of
the shelf supports.
• Assemble the product on a level and
stable surface. Do not assemble on a
carpet or similar.
• Place heavy and/or bulky objects on the
bottom shelves.
SYMBOLS
Approved in accordance with
the relevant EU directives.
TECHNICAL DATA
Size W 914 x D 457 x H 1829 mm
Max weight 120 kg/ shelf
DESCRIPTION
A. Angle bracket (8)
B. Long shelf support (10)
C. Short shelf support (10)
D. Shelf (5)
E. Post cap (8)
F. Post insert (4) (Used for assembly as shelf).
G. Post clamp (2) (Used for assembly as
workbench).
FIG. 1