Page 5
For technical questions, please call 1-888-866-5797.
Item 57205
6. Place Light into Mounting Pad
and use Screws (4) or (5),
Spring Washers (3), and Lock Nuts (2)
to secure Light to mounting area.
a. Installations with access to the
back of the Mounting Base, use
M6 Screw (4) with Lock Nut (2).
b. Installations with no access to
the back of the Mounting Base,
use Self Tapping Screw (5)
and Spring Washer (3).
7. Install a switch (sold separately)
inside the vehicle cabin in
a convenient location.
8. Install a relay (sold separately)
by drilling or locating a mounting
hole and securing it using a sheet
metal screw (sold separately).
Note:
Install relay with terminals facing
down and higher than the wiring. This
reduces the possibility of water entry.
CAUTION!
Waterproof all
wiring connections.
9. Ensure that switch and light wire
connections to the relay are secure.
10. Attach the red wire(s) to a
5 amp fuse
(sold separately) and wire the other
side of the fuse to the positive battery
terminal. The fuse should be as
close as possible to the battery.
11. Attach the black wire(s) to the
negative battery terminal.
CAUTION!
Before connecting
wires to a battery, ensure that the
switch is at the ‘Off’ position.
12. Use wire ties (sold separately) to
secure the wires to the vehicle and/
or bundle the excess wire together.
13. Re-attach the vehicle battery
cables, positive and negative.
WARNING!
TO PREVENT SERIOUS
INJURY AND FIRE:
Connect
wires with the correct polarity.
