Harbor Freight Tools One Stop Gardens 94954 Assembly And Operating Instructions Manual Download Page 3

SKU 94954 

For technical questions, please call 1-800-444-3353.

         Page 3

5.      

Use the right tool for the job

.  Do not attempt to force a small Pump to do the 

work of a larger industrial Pump. There are certain applications for which this 
Pump was designed. It will do the job better and more safely at the rate for which it 
was intended. Do not modify this Pump and do not use this Pump for a purpose for 
which it was not intended.

6. 

Maintain Pump with care

.  Keep Pump and filter clean for better and safer 

performance. Follow instructions for changing accessories. Inspect tool cord 
periodically, and if damaged, have it repaired by an authorized technician. 

7. 

Disconnect power

. Unplug Pump when not in use.

8. 

Stay alert

.  Watch what you are doing, use common sense. Do not operate any 

Pump when you are tired.

9. 

Check for damaged parts

.  Before using any Pond Kit, any part that appears 

damaged should be carefully checked to determine that it will operate properly 
and perform its intended function. Check for alignment and binding of moving 
parts; any broken parts or mounting fixtures; and any other condition that may 
affect proper operation. Any part that is damaged should be properly repaired or 
replaced by a qualified technician. 

10. 

Replacement parts and accessories

.  When servicing, use only identical 

replacement parts. Use of any other parts will void the warranty. Only use 
accessories intended for use with this kit. Approved accessories are available from 
Harbor Freight Tools.

11. 

Do not operate Pump if under the influence of alcohol or drugs

.  Read 

warning labels on prescriptions to determine if your judgment or reflexes are 
impaired while taking drugs. If there is any doubt, do not operate the Pump.

12. 

Use proper size and type extension cord

. If an extension cord is required, it 

must be of the proper size and type to supply the correct current to the tool without 
heating up. Otherwise, the extension cord could melt and catch fire, or cause 
electrical damage to the tool. This product requires use of an extension cord of 

0 to

 

10 amps 

capability (up to 50 feet), with wire size rated at 

18 AWG

. Longer 

extension cords require larger size wire. If you are using the product outdoors, use 
an extension cord rated for outdoor use (signified by “WA” on the jacket).

13. 

Maintenance

.  For your safety, maintenance should be performed regularly by a 

qualified technician.

Recommendation: 

For your safety, it is recommended you do some research on your 

own on pertaining to assembling a pond. See State and Federal requirements for 
ponds and standing water.

Summary of Contents for One Stop Gardens 94954
















Reviews: